Slime: Problem with installing ESXI5.0 dual NIC in "solve" VMware workstation

This article by show according to Lin Feng to provide friendship sponsorship, starting in the mud row world.

Because of the need to do ESXi-related experiments, you can experiment with VM virtual ESXI on your own machine. Because the experiment requires two NICs, two NICs were added when the ESXi virtual machine was created. As follows:

However, the problem arises, in the installation of ESX found only one NIC. Because there was no at that time, so cannot show here. Anyway, only one NIC can be seen on the network card at ESXi's configuration management address.

Later inquiries related to the information has not been found, related solutions. Changing the ESXi version from 5.0 to 5.1 does not work. It is not possible to replace an ESXI virtual machine.

Then there is no way to adjust the ESXi virtual machine processor. As follows:

Modified to 2 by the original number of processors 1. The number of cores per processor has been modified to 2. In this way again to visit ESXi actually saw a long-lost another card.

But yesterday in order to write this article, restore this error found. The processor of the ESXi virtual machine cannot be restored, regardless of the adjustment.

After careful thought, we restarted the machine between us. I suspect that it is possible that I have installed, what software caused the problem of not recognizing another card. The problem disappears after the reboot.

Anyway, this issue has not appeared, this article is also recorded.

Slime: Problem with installing ESXI5.0 dual NIC in "solve" VMware workstation