Software upgrades of Secpath series firewalls

Boot online upgrade

"TFTP mode"

1. Configure Secpath and PC addresses so that they are interoperable.

2. Enable the TFTP server program on your PC and specify the directory where the boot files are upgraded.

3. Copy the boot file into flash. Under User view, execute the following command:

<>copy X.x.x.x/bootromfull Bootromfull

Here, x.x.x.x is the address of the PC, bootromfull for the upgraded boot filename, note: only bootromfull. If only the boot extension segment is upgraded, the file name that is copied should be bootrom. If you cannot determine whether you want to upgrade the boot extension segment or the entire boot, it is recommended that you upgrade the entire boot file directly.

4. Upgrade Boot to execute:

<>upgrade Bootrom Bootromfull

Here, Bootromfull is the name of the file being copied.

5. Reboot the system.

"FTP Mode"

The same medium and low end router VRP3.3 version.

Software online upgrades

"TFTP mode"

1. Configure Secpath and PC addresses so that they are interoperable.

The TFTP server program is enabled on the PC and is specified as the directory where the upgrade files reside.

2. Under User view, execute the following command:

<>copy X.x.x.x/system System

Here, the x.x.x.x is the address of the PC, system is the file name for the upgrade, note: only system.

3. Reboot the system.

"FTP Mode"

The same medium and low end router VRP3.3 version.

Description

The secure gateway-side application default name is System, and the default name of the configuration file is called the vrpcfg.cfg,boot ROM extension segment file default name is Bootrom, and the entire Boot ROM file defaults to the Bootromfull.

Bootrom Menu Upgrade

The same medium and low end router VRP3.3 version. Not recommended.