Some Common commands for routeros soft Routing

In this article, I will write some common commands to help you:

1. What will be frequently used during login? Is commonly used to assist the decree, can list available decree and briefly clarify.

2. Some commands in English are very long and can be abbreviated as interface. You enter in and press enter to enter the interface. Maybe you can press the tab key to help you complete the input of the English decree.

3. There are many parameters in the Decree. When you do not know it, you can enter a space after the decree? Such as print? The parameters of the decree can be displayed.

4. setup the decree, but everyone should remember, because it is necessary to use it to assign the IP address of the NIC after the routeros is installed.

5. iprouteaddgate = 211. 12. *. 14,220. 163. *. 12 The decree is used to participate in multiple gateways during multi-line access.

6. ipfirewalladdaction = natprotocol = tcpdst-address = 212. 12. *. */32: 80to-dst-address = 192.168.0.198 the decree is used to map port 80 to the local 192.168.0.198.

7. print this decree is used to list all projects.

8, interfacemonitor-traffice0, 1, 2 can be taken care of at that time, 1, 2 Nic movement.

9. ipfirewallconnectionprint shows all the connections at that time.

10. iparpprint displays the list of IP addresses and mac addresses that all routeros know.

11. useractiveprint displays all routeros sports users.

12. systemreboot and systemshutdown are respectively restarted and shut down.

13. systemreset deletes all original equipment and restarts routeros.

14. systemresourcemonitor can monitor the cpu usage and memory usage at that time.

15. logprint can display routeros diaries.

16. toolping-speed210.13.14. * shows the ping speed.

17. toolsnifferstart and toolsnifferstop can enable and stop the sniffer.

18. toolsnifferpacketprint can be used to list sniffing packets.

19. systembackupname = 2004107. bak can back up the system equipment to the file 200.07.bak, which can be seen in fileprint.

What else can enable, disable, remove, and set.

After I used routeros soft route to access two optical fibers, I often used some of the commands and found that routeros soft route is really a good device, so I could not help but write it out and publicize routeros soft route. There are some immature things. I hope everyone will forgive me.