Steps for installing an HP Blade Server

Original article link

Steps for installing an HP Blade Server:

The HP blade uses a management platform named OA (onboard administrator) for unified management, which is highly integrated and easy to use. You can enter an IP address in the IE browser for management.

Installation steps:

1. Determine the IP address of the OA

2. determine the user name and password of the OA (on the tag of the module below)

3. log on to Oa and select the corresponding host Module

4. log on to HP's L

5. Mount the local ISO/Optical Drive for installation.

Determine the IP address of the OA:

Select enclosure settings on the LCD screen on the front panel of the single-chip server to determine the IP address of the OA:

After confirming that the IP address has been username and password, find the management network port of the OA on the rear panel of the chassis (the blue part in the figure). Find the root network cable and configure the same network segment to log on.

Log on to the OA page:

Select a host. Just click it.

Select the L Interface corresponding to the module

Web management interface:

Full function remote control:

Select a local ISO file or local optical drive for mounting.

After the mounting is successful, click restart and select the optical drive to start the system installation.