The method of correctly installing the ANSYS software under the WIN8 system

Ansys Software is the United States a large general-purpose finite element analysis (FEA) software, is the world's fastest-growing computer-aided engineering (CAE) software, many users use the WIN8 system to install the ANSYS software, will find the installation error prompts, The reason is that the WIN8 system itself lacks the components required by the ANSYS installation, although the WIN8 system is relatively new, but the compatibility of the software is often not a classic WinXP good, so today we have to say is how to solve the WIN8 under the installation of the software Ansys error problem.

Preparation tools: Installation of the necessary components of the ANSYS, ansys14.5, 15.0 installation package, Daemon Lite tools (elf Virtual optical drive).

Action method:

1, download three tools, respectively, is the installation of ANSYS prerequisite components, ansys14.5 or 15.0 installation package, Wizard virtual Optical Drive (Daemon Lite tools).

2. Precautions before Installation:

Before installation, we recommend that you turn off antivirus software 360, because if you set a higher level of anti-virus, it is possible to install some of the commands it automatically blocked, although generally no problem.

3. Use virtual CD-ROM to load installation CD

Download and install the wizard Virtual Optical drive (Daemon Lite Tools), you can use the compression software to open the CD-ROM, but the virtual CD-ROM drive more convenient and faster, the installation of a free license to choose. Open the virtual optical drive, click on the middle of the interface "add DT Virtual Drive" (also can add Sisi virtual optical drive), if used before, the interface will itself exist in a CD-ROM drive letter, such as J:.

This will appear at the bottom of the interface two disc letter H: and J:.

Click on the leftmost "Add image" and select Disk 1 in the pop-up "open" dialog box, then OK.

4, repeat the above operation, will Disk 2 also open, when we see the interface of the "image directory" has two disc Disk 1 and Disk 2. Double-click Disk 1 to eject a Device dialog box, select the "H" disk and determine. After confirming, we see that the H disk in the lower left corner of the interface has been shown as an image of a yellow-bottom black word, indicating that disk 1 has been successfully loaded. Similarly, for the same operation, double-click Disk 2, select the J disk and make sure. After the two installation disks have been successfully loaded, the virtual CD-ROM interface should look like this: The image directory, the most recently used impact, and the bottom-most files will show two discs. If this is not the case, please add it again.

5, install the necessary components of Ansys, download and install the necessary components of the ANSYS, installation can be.

6. Install the main program of ANSYS product products.

Run the "Setup" in Disk1, eject the installation interface of Ansys 15.0, choose Language as English, then click "Install ANSYS Products" to start the product Main program installation.

Then select the features you want to install, usually by default. It is recommended that the bottom model interface be selected in order to connect the various modeling software in the future. Then go to the next step.

7, the final will pop up a survey request, if you choose "Next" will open the browser, here we do not participate in the survey, directly click on the bottom right corner of the "Finish" to complete the installation. The total installation time varies depending on the computer configuration.

Finally for you to summarize the installation of the attention point of ANSYS, the installation process in the difficult place when the installation of the ANSYS prerequisite components, in the installation must pay attention to each option. In addition, during the installation process, we must write to the computer name, as far as possible shut down the software can be closed, so as to improve the efficiency of software installation.