The perfect secret of creating U disk System disk

one, tools/raw materials

A u disk, can also be a mobile phone or digital camera memory card through the reader to connect with the computer;

A bootable system ISO image, can be installed version, clone version, can be maintenance disk, WinPE, etc.

Burning software UltraISO, with a single file green version on it, Golden Fox software package has always had it;

　　Ii. Steps/Methods

1, Start UltraISO, click on the "File" menu under the "Open" button, open the prepared ISO image files, such as Jinhu_system_tool_2009.iso

2, in the lower left corner of the UltraISO interface "local directory" to navigate to the desktop of the "Golden Fox Works" This folder, which all the files in the lower right corner of the file will be added to the ISO image of all files selected and hold down the left mouse button dragged to the upper right corner of the area

3, the file to be added if the original ISO image already exists will pop "replace" prompt, make sure to replace the "yes", this completes the ISO image modification. If you need to use this modified ISO image later, you can save the modified ISO image by clicking Save or Save As on the File menu.

4, burning u disk process. Click on the "Write Hard disk image" command under the "Start" menu in the menu bar to open the "write Hard Disk Image" dialog box.

As shown, "Hard drive" is the choice you want to burn the U disk, here demo is a digital camera memory card. Write by default is usb-hdd+, there are USB-HDD, Usb-zip, usb-zip+, a total of four options, depending on your motherboard to support the type of startup, you can burn forward CMOS look, note that some motherboards need to insert a U disk to display the type of support. U disk can be formatted before burning, but also through the "format" button at the bottom, of course, the direct point "write" can also be automatically formatted.

5, click "Write" will pop-up warning, click "Yes"

6, wait for a while, is burning.

7, after the successful burn will pop-up prompts

At this point, the successful guide to the ISO image into the U disk, in the CMOS set U disk for the first boot, type and burn when the same choice, that is: USB-HDD or usb-zip, so you can launch through the U disk to install a variety of systems. And after burning the U disk is still the same as the original, readable and writable, just a lot of bootable function. If you want to spend more time, you can also put the engraved file as "hidden", and do not want to use or want to change other mirrors, as long as the format can be.

Here, u disk System installation disk production is completed, in fact, the method is very simple, as long as the ultraiso burning software, according to the introduction of the steps, step by step to operate, you can successfully create a perfect USB disk system disk.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join