The reason and solution of not using the network on the router

We often encounter a problem such as the router can not be on the network or connected to the router can not do the network. For routers do not network most because you are not familiar with the router settings or the principle of the Internet routers do not understand, the following article will be for the computer rookie friend detailed introduction of the network with routers and solutions.

To achieve the Internet router must first have the following conditions (for example, the most common telecommunications dial-up Internet connection):

(a): Must have "router", Cat (Modem) Internet access account (ISP network provider provided by the network account, such as telecommunications broadband Netcom, etc.)

(ii): the right router and CAT connection and network cable Connection and settings

Tip: Common router settings and wireless router settings are the same, but the wireless router settings more complex!

Cat and Router connection schematic

As long as the above situation, then you can realize the router online, the focus is on the router settings, here for you to introduce some novice friends may easily ignore the problem.

Router is connected after the need to enter the router set up, the main need to be online accounts and other information to fill in the router and save, a lot of rookie friends will often see the landing of the router, encountered this situation first check whether the router and computer by the normal network cable connection. You can ping the router address to determine whether the connection between the two is problematic.

Some routes do not need to be set to automatically access the Internet, but some routes to enter the router inside the user name and password settings can be routed online, this username and password is your telecommunications user name and password, if you do not know the router address, the easiest way is to look at the router shell tag, Generally is 192.168.1.1 some are 192.168.0.1 enter, the default secret all is admin. But one of the conditions for entering a route is to set up a gateway and route IP in your computer's local connection. In addition, if it is due to improper settings before the router can not be allowed to reset to the router.

        Note : more Wonderful tutorials please focus on the Triple computer Tutorials section, triple Computer office group: 189034526 Welcome to join