Check that there is a mobile phone signal amplifier in the market. I don't think it's too expensive. The poor have to find a solution, so Baidu and Google have joined hands to save money and solve the problem! Finally, I found a way to enhance the mobile phone signal with chopsticks and tin paper. by sorting out similar data, I found this method, and then I bought two pieces of tin paper and chopsticks, I tried it several times, but it still seems to be effective! Now, let's summarize this method here. I hope that it can be verified and improved together with my friends who are equally confused,
We also look forward to expert guidance ~ The procedure is as follows:
Find a few chopsticks, and have a longer bamboo, with a tin foil on them. Take the four chopsticks and arrange them in a brief horizontal Order (the distance is no more than 7 cm ), place the long bamboo sign in the middle and fix it as an antenna! Then, place the prepared antenna above the mobile phone and adjust the direction properly! Do you want to know how it works? Let's give it a try. Don't forget to share the results !!
Below is my finished product
The image of this topic is as follows:
The image of this topic is as follows:
(Reference Materials and video http://www.cctv.com/video/shenghuo/2007/10/shenghuo_300_20071010_7.shtml you want not too much trouble, find a bit of food to eat braised bamboo, and then find a bit of tin paper, the tin paper bag on the shard, then we made four clips (not necessarily a little different), and fixed them vertically on a slightly longer vertical tin sheet. It is a bit like the first homemade TV antenna in the house to find a dry shrubs, and then fold it into six sections, one section is longer than one section, and then wrapped up with tin paper, if there is no tin paper, it can also be replaced by chocolate, chewing gum, or wrapping paper in a cigarette box. Then wrap a long skeleton and bind it with the other six. If there is no thin rope around, use the grass instead! Look, a simple antenna that enhances the phone signal is ready! For ease of use, we can also create a bracket like this. Before using the plug-in, you must first find the external antenna Jack on your mobile phone. The current mobile phone has such a Jack, and then we will roll out a wire using tin paper, connect the two ends of the wire to the mobile phone and the antenna. Hey, now let's verify that the antenna is not working! Have you seen it? One cell signal is enhanced to two cells, and two cells are increased to three cells! The principle is very simple. If you use chopsticks, the objective of putting on the foil is to make sense with the TV antenna you used in the past. When using chopsticks in a tin paper, use a copper wire for insulation. Do not hit the middle of the phone antenna. The other side is connected to the tin paper and then the point on the side of the phone antenna)
The above method has been verified by me for a period of time and found that it is not very ideal. It may be that I encountered a problem in the processing of that step ~~
The solution is as follows:
Simply put, you can use an old aluminum lid and put a radio antenna (preferably not more than 7 cm) in the middle of the lid. I used iron if I couldn't find the aluminum lid. I just needed to paste the surface with foil. In addition, some tableware similar to the arc reflection surface, such as a spoon or iron pan, can be used. You don't have to use them as I do. You can use headphones when answering the phone, use your phone as a landline !!
I have verified it for two months and it has indeed improved significantly !!
The image of this topic is as follows:
The image of this topic is as follows:
Note: It is best not to use this things for thunder. It is estimated that this things may be used for thunder. At that time, I found something covered !!!