Router FAQ Solution:
Open Routing Optimization master, enter the Advanced Settings page, the Internet settings to view the password of the account is entered incorrectly. The Internet account here does not need to enter a suffix such as @163.gd, password re-enter again.
The general network only needs to set up the correct Internet account number and the password to be able to dial the Internet normally, but also some area network operator will make the single limit to the user, only allows simultaneously the segment one user on-line. Can be used in the normal broadband dial-up computers on the use of routing optimization master, into the Advanced Settings page, MAC address clone selected clone as the current computer MAC address save settings, restart the router to take effect.
When a router does not meet too many Internet devices, you can increase the number of routers to increase access to the Internet equipment, At this point if your primary router gateway is the default 192.168.1.1, and the level two router gateway is the default 192.168.1.1, the direct primary router LAN port connection to the level two router WAN will cause the two-level route to not get the IP assigned by the primary router and not be able to achieve the Internet.
At this point you can enter the Advanced Settings page, LAN IP settings will be the default gateway IP to other network segments, example: 192.168.2.1.
If you need to use the level two router when the Network bridge, you can set the previous step, to the Advanced Settings page, DHCP settings to select the shutdown DHCP, save the settings, and then the main router LAN port network cable to any of the two routers of any LAN port, restart the router.