Tutorial on setting up a wired router and tutorial on a router
We need to set up a new WIRED router to connect to the network. In our daily life, we often encounter a situation where the router suddenly cannot access the Internet. We can also reset the router. We use FAST wired router as an example.
First, we connect the power supply of the router. We need to use a network cable to connect the WAN port of the router to the cat. Then we use a network cable to connect to your computer from the LAN port of the router.
Open the built-in IE browser, type 192.168.1.1 in the address bar, and press Enter.
Enter the user name and password (generally account: admin, password: admin), and click "OK ".
Enter the vro interface, click the setting wizard, and then click Next
Here we select PPPoE (DSL virtual dialing), and then click Next
Enter the bandwidth account and password, and then click Next.
Then, click Save (restart vro );
After setting the vro, click "Run Status" to check whether the IP address of the WAN has a valid address. If yes, it indicates that the IP address is set. If no IP address is set, you need to reset it.