Using Ghost to quickly format 120G large hard drives

As we all know, ghost can quickly back up and restore hard disk data, if the operating system on the hard drive paralysis, data loss, you can use Ghost rapid recovery, eliminating the reinstallation of the system and a variety of software troubles. In fact, Ghost is a powerful software, in addition to regular backup, restore data, there are many features.
First, the use of Ghost rapid format large zoning

Today, the capacity of the hard disk is more and more large, every time the format of large partitions, it will take a lot of time, in fact, Ghost can quickly format large partitions.

First a small partition on the hard disk (for example, 40MB), and then format the partition with the format command, noting that you do not store any files on the partition at a later time, then restart the computer with a DOS boot disk, run Ghost, and select Menu "Local→disk→to Image", Make this partition a Gho image file that is stored in a different partition.

Later need to format a large partition, you can use a DOS boot disk restart the computer, run Ghost, select the menu "Local→disk→from image", select the Gho mirror file, select the format of the large partition, press OK key, and then press Yes key.

Two, a few seconds format 120G large hard drive

Because Ghost has the ability to clone an entire hard disk, when the backup is restored, Ghost will redistribute and copy the files according to the partition ratio of the cloned hard disk. If the new hard drive will also be automatically completed in advance format. According to the above principle, you can use a partitioned formatted hard disk as "template" (The hard drive does not install any files), using Ghost Backup and restore to the new hard disk, so that the large hard disk partition format quickly. ---http://www.bianceng.cn

Specific approach: To find an arbitrary size of the hard disk, to it with FDISK, format according to you want to large hard disk partition of the proportion of the partition format well, pay attention not to install any files on it;

Then use the boot disk with the Ghost program to start the computer, run the ghost, using the "local-disk-to image" command to the newly partitioned hard drive image into a software, the file is saved on the boot disk (rest assured that this file should be very small), and a name such as Myfdisk.gho;

Next, make a DOS batch file on the boot disk (editable with the edit command), which reads: ghost.exe-clone,mode=load,src=ahttp://article.pchome.net/00/18/55/97/: Myfdisk.gho,dst=1, save it as a bat file and start with a name like Myfdisk.bat. Then which hard disk to partition format, with this boot disk to start the computer, and then perform Myfdisk.bat, in a minute, no matter how large the hard disk can be successfully completed partition and format. If you want to change the partition ratio, just modify the Myfdisk.bat file, such as divided into 4 areas and want to convert the scale to 1:3:3:3, simply modify the Myfdisk.bat content is: "Ghost.exe-clone,mode=load,src=a: myfdisk.gho,dst=1,size1=10p,size2=30p,sze3=30p,sze4=30p "can be.