Vivo s11t Line Brush Save brick process

Originally wanted to brush a recovery to brush other firmware package, but did not think of failure, and later led to the boot will not open, and recovery the interface of the options have no effect. So I can only brush the line. Baidu a bit. Found a useful URL: http://bbs.hqapk.com/thread-6305-1-1.html

Here is the method:

Http://bbs.hqapk.com/thread-6208-1-1.html

(Note: Everyone should pay attention to the seat, must be careful to see clearly, it is strongly recommended to look at first, and then follow the tutorial step-by-step operation Brush into)
This tutorial WIN7 system offline Brush MTK CPU Phone General tutorial, the official line brush package and brush machine tool also has the driver, need to go to the Cloud Zhuo Forum firmware area, download your phone's official line brush package and drive also has the tool, let after the following tutorial operation can.

Note for brushing machine:
1. The battery charge must be kept above 50%.
2, the data line as far as possible plug in the computer behind the USB view.
3, yellow progress bar after running, you can not disconnect the phone and power.
The first step: The official package and the Brush machine tool that you want to brush into the model, the driver is downloaded and put on the desktop (note: my machineLenovo A898t, although not the same as your model, but the tutorial steps are general, we do not struggle with what my model, tutorials and steps are the same) as shown in



Step Two: Create a new folder of your own model on the computer's D or E drive, then unzip the download Brush tool and the official line brush package into this folder. (Note: My machine Lenovo a898t, although not the same as your model, but the tutorial steps are generic) as shown:

The third step: After the decompression, right click on our computer,
Right click on My Computer and select the "Manage" option as shown in:



Fourth Step: Click on "Device Manager" as shown in:


Fifth step: Staring at the Device Manager area changes, (Early warning: When the phone inserted, there will be a yellow exclamation mark of the mt65xx drive, disappear quickly, so be sure to right click on the update driver, some systems are directly on the popup seventh step of the interface, not surprisingly, this is no problem, Then the operation can be done)



Sixth step: Mobile phone off, take off the battery, then installed, and then what buttons do not press, directly plug in the phone to the computer above, the Device Manager will pop up a "yellow mt65xx driver", if there is no automatic popup seventh step of the interface, you must quickly right click "Update Driver", if you are not fast enough , the yellow drive disappears, do not tense, the mobile phone pulled up again plug, this drive still will bounce out, then quickly right click "Update Driver" can, into:





Seventh step: After this interface, we press the Red box prompt, click the "browse button" in the back ,Then find our new "model of the Brush Machine folder" folder inside the Driver-usb VCOM Driver (binary) folder, and then according to your system, select the driver, XP system driver is: 2k_xp_com folder. Vista system driver is: Vista folder. Win7 System Select Win7 folder, then click OK




encounter the following pop-up selection, we choose to always install, if not play, some systems may not eject this option can also be installed properly, if you find that the driver is installed, but the beginning of the brush machine, or repeatedly asked to install the driver, it shows here the problem, It may be that your system is a lite version of the system, causing the driver to not install the reason, it is recommended to replace the installation version of the system.



Eighth step: The driver installation is shown.


nineth Step: Go to the "Brush Machine Tools" folder and open the folder in the Red box



Tenth step: Then open the Flash_tool.exe software, such as the icon in the red box.



The 11th step: After the software opens, then click on the Scatter-loading button, enter the folder, find your line brush package decompression, and then select the corresponding TXT file, click Open,



in the pop-up window, locate the folder you put in your line brush package.



then select the TXT file in the official line brush Package


12th step: After 11-Step click Open, the software will be loaded with the entire official package, as shown, remember to check the DA DL all with check Sum before the tick,



13th step: To this step is very important, before the implementation of this step, remember to first turn off the phone first, take off the battery, do not boot, and then disconnect the data line with the phone, but the data line to plug in the computer, but the phone is pulled away, and then press the Red box button


14th Step: After this button, the Brush machine tool appears to verify the official line Brush package Purple progress bar, some are not added, or color is not the color, do not panic, because some are not displayed, or the color of the line brush is not the same, as long as not error, are normal.


15th step: After the magenta progress bar is loaded, it will stop at 0% as shown in. At this time we put on the cell phone battery, do not press any button, directly plug the phone into the computer above the data line.




16th step: After the phone plug in, the Red progress bar will appear in the running. The next corner will appear a port, the port is based on the respective computer, not fixed the same, staring at the computer, do not move the computer and mobile phone. If you stop here and don't move. Unplug the phone and plug it in., do not move, it is recommended to click the "Stop" button to stop, and then start from the 13th step.


17th step: One but the yellow progress bar, the description has begun to brush the machine, at this time, can not disconnect the data line, can not power off the middle, otherwise it will change brick, is the real brick.



18th step: Pop the green circle below, indicating that the line brush has been completed, then we just need to close the tool, and then take the battery in the phone, and then installed on the boot can.

There are a few steps in this method is a bit of a problem, this method is suitable for Win7, but my computer is win8.1, so in this process encountered a problem, is to install the driver will fail

Baidu a bit to solve the method:

But there is a problem, that is, to the next step when the click No response,

I Baidu a little find is not only me a person is this situation, I do not know the author of this article is how to do, but I later my own random toss, plug in the mobile phone, to this step when clicked incredibly progress bar began to move, it is strange, but my line brush brush is the mobile version of the line brush package, not easy to use, The purpose of my brush is actually to restore the original phone recovery mode, then I succeeded in recovery inside and re-brush a I before the official Web download firmware package. Also restored the original appearance of the phone, but there are some places and the original is not the same, the brush machine can not change, such as mobile phone lock screen interface has changed. I think it may be in the line brush package inside the impact of it, but the phone has finally recovered is very good.

Vivo s11t Line Brush Save brick process