vmware-vcsa-6.5 installation Process

1. Create a new virtual machine

2. Select Import from OVF or OVA file

3. Name the virtual machine and select the OVF file.

4. Select the storage location for the virtual machine. There is no storage configured for shared storage accommodation, where the host is selected.

5. The consent of the license agreement is OK.

6. Deployment options, network Select the default VM network local management network. Deployment Type Select small vcenter support 100 host, 1000 virtual machines. Disk provisioning because of the free space problem I chose thin provisioning.

7, according to the planning configuration vcenter related information.

8, check the relevant information, confirm that no problem choose to complete.

9. In this step, wait for the virtual machine deployment to complete, do not refresh the browser, do not point other options.

10. Until the vcenter address that you just configured is ping pass.

11, in the browser open the vcenter virtual Machine Remote Desktop, you can see the login https://10.100.10.99:5480 for vcenter deployment.

12. Enter the Vcenter deployment interface and choose to set up Vcenter Server Appliance.

13. Enter the password that you just configured for SSO.

14. Select Next

15, in the location of the system name, because of the problem of DNS resolution, I entered the IP address.

16, because of the DNS resolution problem, the SSO domain name is configured to default to Vsphere.local.

17. Add CEIP by default, next.

18, check the configuration information, confirm the correct completion.

19, wait for configuration to complete.

20, the configuration is complete.

21. Once the configuration is complete, login to the management interface to see the relevant information of vcenter.

22. Login Vcenter

23. Add License

vmware-vcsa-6.5 installation Process