What is the reason for the intermittent flame of a liquefied gas stove?

Notes

(1) when the gas stove is cooking food, sometimes the overflow of logistics or foreign substances fall into the fire hole, the burner fire hole blockage, so that the gas and air mixed gas flow blocked, the flame is small and powerless. The elimination method is to remove the burner, clean the blocked fire hole, and clean it with water. After such a processed burner, a small flame fault can be ruled out;

(2) quickly use up the gas source. When using a gas stove with liquefied petroleum gas, the liquefied petroleum gas in the cylinder is quickly used up, the Green zhouwan apartment will also make the burning flame very small due to insufficient pressure or too much residual liquid in the bottle. At this time, a new cylinder should be replaced;
(3) the pressure relief valve nozzle or gas stove nozzle is blocked. When the pressure reducing valve or burner nozzle is blocked, the gas is not sprayed smoothly, and the combustion flame is weak. The elimination method is to clear the nozzle with fine steel wires;
(4) the angle valve opening is too small, and the angle valve can be opened at this time;
(5) when the hose is squashed or bent, the gas volume is small. If the circulation is blocked when the hose is bent, you can straighten the hose; if the hose is squashed, you can replace the new one;
(6) the gas stove using the pipe burner may also cause a very small flame due to the small diameter of the pipe and the blockage of corrosion in the pipe.

Big city ego solution process

I read the gas stove carefully. I suddenly found a vent was blocked by a cockroach. I stabbed the cockroach with a needle and fired again. It was normal. Remember to turn off the switch before checking.
If the air is insufficient, the flames may Yellow. Your current situation may vary depending on the gas used by the burner, and some gas may be congested or not ventilated.