What to do when the system is powered on and infinite automatically reboots?

(Windows Advanced Options menu settings)

1.Windows Advanced Options menu, try using the arrow keys to move to the last known Good Configuration, and then enter to reboot the computer to try to get into the system properly.

2. If still not normal access to the system, press F8 again into the Windows Advanced Options menu, use the arrow keys to move to [disable system failure automatically restart] This item, enter OK, the computer automatically restart. Do you want to enter the system properly?

3. If still unable to enter the system normally, press F8 again to enter the Windows Advanced Options menu, select the first [Safe mode] Enter the system. Press the following procedure.

Tips: General Security mode is sure to enter the system, if the Safe mode is unlimited automatic shutdown, you can consider whether the hardware reasons, the best way is to first reload the system to try.

After you enter Windows Safe Mode, it is the same as the normal way of doing things.

My Computer Right button "System Properties Advanced" Startup and Recovery "settings" Automatically reboot check remove.

With

On the desktop find [My computer] and on my Computer icon on the right key properties, open the System Properties program window, locate and click to switch to the Advanced tab in the System Properties window, and locate the [Set] button under Startup and recovery on the Advanced tab.

(System property Startup and recovery Settings)

In the Open Startup and Recovery window, remove the check in front of the [automatic reboot] and then determine.

(Turn off automatic restart settings)

Again in the desktop space, right-select Properties, open the Display Properties program window, locate and click the switch to the Screen Saver tab in the Display Properties program window, locate and click the [Power] button in the Screen Saver tab, as shown in the following illustration.

(Display property Settings screen saver)

In the Open Power Options Properties Settings window, locate and then click the switch to the Advanced tab, and in the Advanced tab, look at the following figure settings and make sure to return to the Display Properties window to determine again, and then restart the computer when you have finished setting.

(Power Options Advanced settings)

Is it necessary to check for an exception to the boot entry? For example, there are some unfamiliar startup items in the boot entry? You can use the Msconfig function or some software can be used to achieve this boot startup item disabled

After the startup settings, you can try to restart the computer again, restart the computer if it is found that again, then it is best to enter the Safe mode again, the overall antivirus, anti-virus after restart again, such as, it is recommended to reload the system.