WiFi Sharing elf phone can't find hot spots what to do

Situation One:

The computer is an XP system, the handset is an Android system, the XP system itself does not support WPA2 sharing mode, but your Android phone only receives the hot spot of the model (the iphone can be found), so we recommend that you change your computer system as soon as possible or use a WiFi treasure.

Situation Two:

If it's win7/win8--'s Android phone. Hot spots: Refreshing the virtual network card (free WiFi startup failed? Error code 1203 is also due to a virtual NIC exception). The specific method of operation is as follows:

Workaround:

Open the WiFi Sharing Wizard! Be sure to open the software!

Right click on the computer, click Management--Device Manager--network adapter, the right mouse click on the scan hardware drive ~ To scan more than a few times Oh!

Scan hardware to wait a minute after the scan, the system will automatically detect the repair! According to the different people's system environment scanning times are also different, look at the individual situation! Finally it will become the following situation! Look at the virtual NIC is normal!

2, if the above method can not solve your problem, then try the following this method!

Click Start (win7 system machine

, the other system machine computer desktop in the lower left corner of the Start menu), in the search box input cmd, and then press ENTER, the following interface appears

Enter the Netsh wlan set host Mode=allow, and press ENTER to receive the prompt as shown in the following illustration:

Enter the "Netsh wlan start host" command and press ENTER to open the hotspot again.

Situation Three:

WIN7, WIN8 users, Android mobile phone can not find hot spots, wireless network card Advanced Mode is incompatible (in the wireless network card-Properties-Advanced inside no wirless mode settings cause incompatible) only updated wireless network card driver, updated can not even change the network card.

The software startup is unsuccessful, the virtual NIC in the shared mode does not come out or the error code 1203 or the iOS device can not find the hotspot, how to do it, this requires you to manually uninstall your physical network card to try

Uninstall method:

WIN7/WIN8 System:

Computer-Right-click-manage-Device Manager-Network adapter-Select your wireless network card (wireless LAN) Right click Uninstall, figure "Uninstall wireless network card" (Do not tick)-Direct OK-Mouse Select Computer name (XKHZ-WWG) scan detect hardware changes as shown in "Scan hardware" Need to wait a few minutes the system will automatically install the wireless network card, after the installation is complete, you can open the software to use the software normally.

If scan detection hardware changes do not successfully download the Driver wizard or drive life, update the driver can be

Uninstall the wireless Card

1, point sure, do not tick oh (not tick)

Click on the computer name-right-click Scan detection hardware changes are completed.

XP system users uninstall the physical network card method is the same, just need to help "computer" into "My Computer", make changes on the line

2, the point sure, accidentally tick, you need to download a drive life or drive wizard and so on driver software, to scan reinstall wireless network card driver.