windows2003 System Optimization

One, special attention: Do not want to let windows2003 become a friend of the snail remember, do not configure your windows2003 into the default server (the first start of the thing will come out), especially not by default, if you want to manually open a part of the server function, remember that a dongdong can not open, That's domain management. Of course, if your machine is serious to do the server, then when the vessels. The domain management feature will make your machine start down a lot.

To disable the Configure Server Wizard:
Since there is no need for server provisioning, first we disable the "Configure Your Server" (Manage Your Server) wizard, and you can-> Administrator tool (Administrative Tools) in Control Panel- > Manage Your server (Manage Your server) to run it, and then in the lower left corner of the window check "Do not show this page when you log in" (Don t display this pages at logon).

Other:

★ Remove the Hibernate function: "Control Panel-Power Options-Hibernate", the "Start sleep" before the hook removed, about 200MB space savings.

★ Turn off the automatic completion of IE browser: Start IE, select "tool-internet option-Content-Auto complete", cancel all options, and clear the automatic completion history, OK exit.

★ Turn off the Internet Time Sync feature: ① turn on the start/Set/Control Panel/Date and time options, select Internet time, and cancel automatic synchronization with Internet time servers; ② Control Panel-Administrative Tools-Services, disable Windows Time service.

★ Prohibit remote users from modifying registry settings on this computer: Control Panel-Administrative Tools-Services, disable remote Registry service.

★ Display Properties-On the desktop, cancel the desktop cleanup that automatically runs every 60 days.

★ Enable DMA Transfer mode:
DMA, or direct memory storage mode, refers to the computer peripheral equipment (mainly refers to the hard disk) can directly and memory exchange data, which can speed up the hard disk read and write speed, improve speed according to transmission rate. For some reason, Windows XP sometimes uses PIO parallel input and output transfer mode on the IDE channel instead of DMA mode. If this is the case, the user can manually change the IDE channel to DMA mode, which reduces the CPU cycles that the device occupies. Right-click on "My Computer", select Properties, select the Hardware tab, click the Device Manager button, open Device Manager, and then click to expand the IDE ATA/ATAPI Controller branch, where IDE controller has two main IDE channels and secondary IDE pass. , and then enter properties/Advanced settings, which lists the transfer modes of the devices currently connected to the IDE interface, checks the transfer Mode Drop-down menu, sets them all to DMA (if available), and clicks OK.

★ Move File Storage Path:

1, My Documents: Right-click My Documents, select Properties, change the destination folder location.
2. Internet temporary folders-temporary Internet Files:
Starting Internet Explorer, select Tools-internet option-General-internet temporary files-settings-Move folder. At the same time, set the master page to a blank page in Tools-internet Options-General, set the page history to 0, and in security in Tools-internet options-Advanced, select the "Empty Internet temporary folder when closing browser", but temporary The content in the Internet files/content.ie5 needs to be cleaned manually.
3. Temp temporary folder: Right-click "My Computer", select "Properties-Advanced-Environment Variables", (1) User variables: TEMP and TMP, place them by default C:\Documents and settings/username/local settings/ The Temp is changed to a different location, such as D:/temp. (2) System variables: the location of TEMP and TMP is also changed to the same location as the user variable above. Restart the computer to take effect.

★ Optimize Visual Effects: Right-click on "My Computer", "Properties-advanced-Performance", select "Visual Effects", turn off some flashy visuals to free up your system resources. It is recommended that you keep only 3 items: Use visual styles on Windows and buttons, use common tasks in folders, and use shading for icon labels on your desktop. In the display property-appearance-effect, cancels all effects.

★ Disable Error Reporting:
Right-click on "My Computer" (my Computer)--Attributes (properties)--Advanced (Advanced)--click on the "Error Report" (Reporting) button, in the window that appears to "Disable error Reporting" (Disable error Reporting) Select and check "but notify me when serious errors occur" (But, notify me when critical errors occur.).

★ Adjust Virtual Memory:
Some friends often feel overwhelmed with shutting down and logging off, and the solution is to disable virtual memory so that your logoff and shutdown times may be much faster. Right-click "My Computer" (my Computer)--Attributes (properties)--Advanced (Advanced)--Performance (performance)--Settings (Setting)--Advanced (Advanced), click "Virtual Memory" (Virtual memory) section of change, and then select No paging file in the window that appears. Reboot the system.

★ Right click on "My Computer" (my Computer)--Attributes (properties)--Advanced (Advanced)--Performance (performance)--Set (Setting)--Advanced (Advanced), the "processor plan" (Processor scheduling) and memory usage (Memory usage) are assigned to Programs (PROGRAMS) for use. Then click "OK" (OK).

★ Disable System Service QoS:
Start menu → run → type gpedit.msc, and the Group Policy window appears. Expand Administrative Templates → network, expand QoS Packet Scheduler, right-click restrict reserved bandwidth in Settings in properties, select Disabled, and make sure that you have restricted retention of bandwidth in the setting in the property, and that Can When the above modifications are completed and applied, the user can see the QoS Packet Scheduler (QoS Packet Scheduler) in the General Properties tab bar of the Properties dialog box for the network connection. Description The modification was successful or the modification failed.

★ Close Chinese Doctor Dr.Watson (for Home Edition "Homeedition" and Professional Edition "Professional") enter "drwtsn32" command in "Start"-> "Run", or "Start"-> "program"-> "Attachment"- > "System Tools"-> "System Information"-> "tool"-> "Dr. Watson", call out the system of Chinese doctor Dr.Watson, only the "Dump all thread context" option, otherwise once the program error, hard drive will read for a long time, and occupy a lot of space. If this is the case, look for the User.dmp file, which saves dozens of MB of space after deletion.


Second, the cancellation of the site security check:

Disable the Internet Explorer enhanced security and the appearance of the Stop-safe query box:
Customize the security level for IE in the IE tools option. Pull the scroll bar on the Security tab to set Internet zone security to Medium (Medium) or medium low. Modify the selection "prompt" in the Customization settings to select "Prohibit" or "enable".

Newly installed Windows Server 2003 operating system, open the browser to query online information, found that IE always "bother" to remind us, whether we need to add the Web site currently visited to their trusted sites; If you do not trust, you can not open the specified Web page; You must click the Add button to add the page to the list of trusted Web sites. But every time you visit the Web, you have to go through such steps, which is obviously too cumbersome. In fact, we can use the following methods to let IE cancel the site security inspection:

1, sequentially executes the "start"/"Settings"/"Control Panel" command, in the Open Control Panel window, double-click the "Add and Remove Programs" icon, the interface switch to the "Add and Remove Windows Components" page;
2, with the mouse to select the "Internet Explorer Enhanced Security Configuration" option, continue to click the Next button, you can remove the option from the system, 3, and then click the "Finish" button, exit the component Removal Prompt window.

III. Enabling hardware and DirectX acceleration:
★ Hardware Acceleration: Desktop Right-click-Property (properties)-> settings (Settings)-Advanced (Advanced)-Troubleshooting (Troubleshoot). Pull the hardware acceleration scroll bar of the page to full, preferably click OK to save the exit. This may be a moment of black screen is completely normal.

★directx acceleration: Open start-> Run, type "DxDiag" and enter the "DirectX Diagnostics Tool" (DirectX tools), on the display page, Click DirectDraw, Direct3D and AGP texture accelerate three buttons to enable acceleration. Pull the "Hardware acceleration level for sound" (Hardware Sound acceleration levels) scroll bar to full acceleration.

Four, enable the sound card:
After the system is installed, the sound card is prohibited, so you want to enable it in the Control Panel-> sound->, reboot and then set it in the taskbar display. If you are using the Windows Server 2003 Standard version, make it from step two, because the standard version has allowed sound services.
★ Open "Start" (start)-> "Run", type "services.msc", locate "Windows Audio" in the window that appears and double-click it, and then select Auto in the Drop-down menu in startup mode (startup type) (Automatic) and click "Apply" (apply)-> "Start" (start)-> "OK" (OK).
★ Open "Start" (start)-> "Run", type "DxDiag" and enter "DirectX Diagnostics Tool" (DirectX tools), on the "Sound" (Display) page, put "Hardware acceleration level of sound" The scroll bar (Hardware Sound acceleration level) is pulled to full speed acceleration.

V. How to enable ASP support:

Windows Server 2003 is installed by default and is not installed with IIS 6 and requires additional installation. After you install IIS 6, you also need to turn on standalone support for ASP. The method is: Control Panel-> management tool->
Web Service Extensions-> Active Server Pages-> allowed.

Vi. enabling Desktop themes and hidden files:

Open start-> Run, type services.msc, select Themes Theme (default is prohibited), and then change to Automatic, press apply, and then open to select "." Then click on the properties of the desktop, and choose Windows XP Windows Server 2003 to display all folders by default in the subject, if you can hide it by opening any folder, select Tools-> Folder Options-> view, Select "Do not show hidden files and folders" and click "OK".

The reasons for shutting down when the shutdown is disabled select:

Shutdown Event Tracking (Shutdown event Tracker) is also a setup that differs from other workstation systems in Windows Server 2003, which is a necessary choice for the server, but it is not useful for workstation systems and we can also ban it. Open "Start" Start-> "Run" runs run-> enter "Gpedit.msc", in the left portion of the window that appears, select Computer Configuration (Computer Configuration)-> "Administrative Templates" (Administrative Templates)-> "System", click "Shutdown Event Tracker" in the right window and select "Prohibit" in the dialog box that appears (Disabled), and then "OK" (OK) exit after saving, so that you will see a shutdown window similar to Windows 2000.

Eight, how to use USB hard disk, U disk, add already have partitions of hard disk:

My Computer (right-click)----Manage----Disk Management-----Perform import and assignment letter operations on the appropriate hard disk.

Disable Boot Ctrl+alt+del:

★ Method 1: Open the registry (run-> "Regedit"), and then open:
hkey_local_machin| software| Microsoft| Windows nt| CurrentVersion | Winlogon segment, right-click in this paragraph, create a new two string segment, autoadminlogon= "1", defaultpassword= "password set for Superuser administrator".
Note that you must set a password for the administrator, or you will not be able to implement self booting. You can then restart Windows to enable automatic logon.

★ Method 2: Administrative Tools-> Local security Settings (local safety policy)-> native policy-> security options-> Interactive Logon:do not require , enable it.

Ten, turn off default sharing for Windows 2003 systems:

★ Prohibit automatic opening of default shares (this operation does not turn off ipc$ sharing):
Windows 2003 by default, C, D, E ... All disks are shared by default, and share names are C $, d$, e$ ... And so on, there's also a admin$, because these shared names end in $ (hidden), so they can't appear in the list of shared folders in the network Places, but these shares are real, and you can access the files and manipulate them by directly entering//ip/c$ or mapping a network drive. You need to provide an administrator password when sharing (if the password is not empty). To improve the security of Windows systems, we strongly recommend that you turn off this type of default sharing: Open Registry Editor and find Hkey_local_machine/system/currentcontrolset/services/lanmanserver /parameters, in the right window, set the DWORD value AutoShareServer and AutoShareWks key values to 0 (if not the new value), restart it.
★ Turn off ipc$ and default shared-dependent services: Server services. If you are not on a local area network, you can stop the Server service and disable both the computer Brouser and distributed File system services, as well as workstation and remote Procedure call (RPC) Locator service.

Xi. allow built-in IMAPI cd-burning services and support for Windows Imaging Device services:

★ Enable the Windows built-in IMAPI cd-burning service: Open start-> "Run", type "services.msc" and find "IMAPI cd-burning COM in the window that appears" Service "and double click it, then select" Automatic "in the Drop-down menu in startup mode, and click Apply->" Start "->" OK "(OK).

★ If you are a video device like a digital camera or scanner, you should open the Windows Image Acquisition service.
Open start-> Run, type "services.msc", locate "Windows Image Acquisition (WIA)" In the window that appears, and double-click it, and then in startup mode (Startup type Drop-down menu, select Automatic (Automatic) and click Apply-> "Start" (start)-> "OK" (OK).

12, resolve the SP1 after the DCOM Error event report:

The first step: Click start → management tools → component Services;
Step Two: Expand the computer-My computer and then double-click the DCOM configuration;
Step three: Find "Netman" in the right window (as shown below), right click → properties → select "Security" page → select "Start activation permission" column custom → click next to edit;
Fourth step: In the subsequent Launch Permissions window, click Add;
Fifth step: In the pop-up window select Advanced;
Sixth step: Click to find immediately, wait a moment, in search results find "network SERVICE", double-click → OK;
Seventh step: to "network SERVICE" local activation on the hook "allow", restart problem resolution.

13, from the Start menu to remove the "user name", "Logoff"
The Group Policy Program is located in the C:winntsystem32 folder, which is named "Gpedit.msc." When you start Group Policy, you can start Windows Group Policy by first clicking the Start button, selecting the Run command, entering the Gpedit.msc command in the Run text box, and then clicking OK. Open in turn:
Group Policy-Local Computer policy-User Configuration-Administrative Templates-taskbar and start
With Group Policy, you can enable the "Remove user name from Start Menu" policy in the right-hand pane.

14, remove 2003 boot to enter user name and password
Start-run, input control userpasswords2, enter, custom.

Add "Copy to Folder" and "Move to Folder" for right-click menu:
Run regedit, expand: Hkey_classes_root/allfilesystemobjects/shellex/contextmenuhandlers, right-click Contextmenuhandlers, select New-Item , named "Copy to", select "Copy to" and in its pane, set the value data of the default string to {C2fbb630-2971-11d1-a18c-00c04fd75d13}, OK. Right-click Contextmenuhandlers, select New-Item, name "Move to", select "Move to", and in its pane, set the value data for the default string to {C2FBB631-2971-11D1-A18C-00C04FD75D13 }, OK.

16, speed up the menu display speed:
Select Start/Run, enter regedit, eject Registry Editor, look for Hkey_current_user/controlpanel/desktop, change the Menushowdelay key value to 0, and your menu will be unexpectedly fast.

17. Task management: 1, reduce the waiting time before the program closes:
Run regedit, expand: Hkey_local_machine/system/currentcontrolset/control, find string value waittokillservicetimeout (if no new value, same below), Change the default value of 20000 to 1000. Then expand: Hkey_current_user/control Panel/desktop, find the string value waittokillapptimeout, change the default value of 20000 to 1000. 2. Reduce the waiting time when the program goes wrong: Expand: Hkey_current_user/control Panel/desktop, find the string value hungapptimeout, change the default value of 5000 to 200. 3, let the system automatically shutdown Stop response program: Expand: Hkey_current_user/control Panel/desktop, find the string value Autoendtasks, change the default value of 0 to 1.

To view Windows2003 activation:
Start-Runs the "oobe/msoobe/a" command.