Wireless Router fault: Solution for failure of 192.168.1.1

What if the wireless router address 192.168.1.1 cannot be opened?

When we access the Internet, sometimes we cannot open 192.168.1.1 and cannot log on to the WEB management page of the wireless router. How can we solve the fault of a wireless router?

There are two main reasons for the failure of 192.168.1.1:

I. Fault Caused by hardware factors such as line connection or Wireless Router

Hardware faults mainly include network connection cable disconnection, network connection connector looseness, abnormal computer system operation, and damage to intermediate equipment such as hubs or routers, in this case, the fault can usually be identified by observing the wireless router signal lights. Of course, the input voltage is not normal, the internal temperature of the equipment is too high, or the equipment is struck by lightning, and other problems may also cause hardware faults.

When we observe the data signal lights in the wireless router control panel, if we find that the signal lights flash intermittently, it means the line connection is normal. Once we find that the signal lights are not working properly, check whether the connection of the broadband line is in reliable contact, and whether the internal core is in short or disconnected status. During this check, we can use other normal cables for testing.

After removing the cable, we need to go to the workstation to check the wireless network connection settings. For example, we can reset the IP address of the workstation Nic, if you find that you cannot log on to the wireless router when the IP address is automatically obtained, you can use a static IP address and disable the firewall used by the workstation system.

2. Incorrect Parameter settings for wireless routers or IE browsers

If the above troubleshooting method still does not work, we need to open the IE browser of the workstation system to check whether the connection settings of the program are correct.

When performing this check, we can open the IE browser window and click the "Tools"/"Internet Options" command in the menu bar of the window, in the pop-up Internet option settings window, click the "connection" tab, select the "Never dial-up connections" item on the corresponding tab page, and click "OK. Then, click the "LAN Settings" button, clear all the settings in the subsequent settings window, and then click the "OK" button, and try to open IE browser and enter the wireless router address to log on to the connection, check whether the problem that 192.168.1.1 cannot be opened still exists.

3. Restore the wireless router to the factory default settings

If the failure caused by 192.168.1.1 cannot be solved, the only thing we can do is to restore all the parameters of the wireless router to the default factory settings and reinstall the driver of the corresponding device. If this method does not work, we can almost conclude that the wireless router has a hardware fault. At this time, only professional technical personnel are invited to solve the problem, or you need to replace a new wireless router.