According to the survey, many laptops come with 802.11b / g wireless network adapter, no need to install a wireless network card to connect to the wireless network. But often encounter such problems, have not used a wireless or connected to a wireless network laptop will not be able to connect a new wireless network. Let's look at the following wireless network card can not find the network how to do?
. "Start" -> "Control Panel" -> "Network Connections", right-click "Wireless Network Connection", select "View Available Wireless Connections", as shown below:
figure 1
Note: If your "network connection" does not have "wireless network connection", please contact the computer manufacturer's after sales department
. If the computer is currently using the Windows wireless management tools by default, then the results list of the search for wireless networks should appear, as shown below:
figure 2
Tip: If the list is empty, indicating that the notebook did not find any wireless network, click on the top right of the "Refresh Network List"
It is recommended to set the computer to be able to connect to any available network adaptive state, the default is already set up, right-click "wireless network connection" select "Properties", enter the "wireless network configuration" click "Advanced" The wireless mode of operation selected is "Any Available Network" as follows:
image 3
Figure 4
Figure 5
. If you click "View Available Wireless Connection" and the result of Windows is "Windows can not configure this wireless connection ...", it indicates that another program (the notebook manufacturer's tool) is managing the wireless connection, as shown in the following figure:
Figure 6
Select Windows Wireless Management Tool to configure the wireless connection
If you plan to use the wireless management tools provided by the notebook manufacturers, but I do not know what program, I do not know how to use, it must be with the notebook manufacturer's after-sales department. If you plan to use Windows Wireless Manager, then follow these steps:
1. Right-click "Wireless Network Connection" and select "Properties", if there are three tabs in the frame, they are "General", "Wireless Network Configuration" and "Advanced"
Figure 7
Then go to the "Wireless Network Configuration" tab, check the box in front of "Configure My Wireless Network Settings with Windows" and click "OK" as follows:
Figure 8
2. If there are only two tabs in the Properties box, there are only "General" and "Advanced" and no "Wireless Network Configuration" then:
a. Click "OK" to close this frame first:
Figure 9
b. Find "Start" -> "Run", enter "services.msc" and then click "OK" to open the Windows list of services:
Figure 10
c. Find and double-click Wireless Zero Configuration in the service list:
Figure 11
d. Change the startup type to "Auto" and click "Apply":
Figure 12
e. Then click "Start" under the service status, then click "OK":
Figure 13
f. The Wireless Network Configuration tab appears in the Properties box and checks to see if it has been ticked in the box before Configuring My Wireless Network with Windows.