Beidian Switch configuration command line

1. DHCP relay vlan 1 create byport 1 name "VLAN-1" vlan 1 ports add 1/1 vlan 1 ip create 10.1.1.1/255.255.255.0vlan 1 ip dhcp-relay enable ip dhcp-relay create-fwd-path agent 10.1.1.1 server 10.1.2.1 mode bootp_dhcp state enable II. port image diag mirror-by-port 1 create in-port 1/1 out-port 10/1 diag mirror-by-port 1 enable enablediag mirror- -port 1 mode both 3. disable broadcast and multicast ports to protect ethernet 1/1 cp-limit disable multica St-limit 25000 broadcast-limit 20000 4. Configure VRRP switch 1 vlan 1 create byport 1 name "VLAN-1" vlan 1 ports add 1/1, 2/1 // *** 2/1 used for vswitch interconnection vlan 1 ip create 10.1.1.1/255.255.255.0vlan 1 ip vrrp 1 address 10.31.0.254vlan 1 ip vrrp 1 backup-master enablevlan 1 ip vrrp 1 fast-adv-enable enablevlan 1 ip vrrp 1 holddown-timer 4 vlan 1 ip vrrp 1 priority 250 vlan 1 ip vrrp 1 enable ethernet 2/1 perform-tagging enable // *** Tag, which encapsulates the DOT1Q switch 2 vlan 1 create byport 1 name "VLAN-1" vlan 1 ports add 1/1, 2/1 // *** 2/1 used for vswitch interconnection vlan 1 ip create 10.1.1.2/255.255.255.0vlan 1 ip vrrp 1 address 10.1.1.254vlan 1 ip vrrp 1 backup-master enablevlan 1 ip vrrp 1 fast-adv-enable enablevlan 1 ip vrrp 1 holddown-timer 4 vlan 1 ip vrrp 1 enable ethernet 2/1 perform-tagging enable 5. Configure syslog sys syslog host 1 create sys syslog host 1 addr Ess 10.2.1.100 sys syslog host 1 host enable sys syslog host 1 severity info warning error fatal 6. Configure MLT mlt 1 create mlt 1 add ports 3/1-3/4 mlt 1 name "MLT-1" mlt 1 perform -tagging enable // *** you do not need to tag vlan 10 ports add-mlt 1 // *** mlt1 allows vlan10 data to pass through seven or three SMLT switches, core 1, 2, and access switch 1, the core maintains SMLT through IST, and establishes SMLT. The two ports connected to 1 configure the MLT to access the two cores respectively. The SMLT does not need to generate a tree mechanism, and implements the loadbalance of Layer 2. The 8600 series can create 32 groups. The Single Port SMLT mode (server loadbalance) has no limit on the number of groups. Core 1 mlt 10 create mlt 10 add ports 4/1-4/2 mlt 10 name "MLT-IST" mlt 10 perform-tagging enable mlt 10 ist create ip 192.168.168.2 vlan-id 100 // *** pair end Core IP mlt 10 ist enable mlt 20 create mlt 20 add ports 4/3 mlt 20 name "MLT-SWITCH1_1/1" mlt 20 perform-tagging enable mlt 20 smlt create smlt-id 20 vlan 100 create byport1 name "IST" vlan 100 add-mlt 10 vlan 100 add-mlt 20 vlan 100 ip create 192.168.168.1/255.255.255.252 ethernet 4/1-4/3 stg 1 stp disable Core 2 mlt 10 create mlt 10 add ports 4/1-4/2 mlt 10 name "MLT-IST" mlt 10 perform-tagging enable mlt 10 ist create ip 192.168.168.1 vlan-id 100 // *** peer Core IP address mlt 10 ist enable mlt 20 create mlt 20 add ports 4/3 mlt 20 name "MLT-SWITCH1_1/2" mlt 20 perform-tagging enable mlt 20 smlt create smlt-id 20 vlan 100 create byport1 name "IST" vlan 100 add -mlt 10 vlan 100 add-mlt 20 vlan 100 ip create 192.168.168.2/255.255.255.252 ethernet 4/1-4/3 stg 1 stp disable access 1 mlt 1 create mlt 1 add ports 1/1-1/2 mlt 1 name" MLT-CORE_4/3 "mlt 1 perform-tagging enable