Classic tutorial solving shared Internet access with vro Community (1)

Nowadays, the price of routers is getting cheaper and cheaper. Generally, the household-level router has been reduced to around 200 yuan, which can fully cope with the Network Sharing Problem in the family and has become a necessary hardware product in the family network sharing. Vrouters are not only easy to install, but also easy to set up. They also have many built-in utility tools, which not only simplifies sharing, but also increases the security of Internet access. Next we will give you a detailed introduction to the specific setting method of TP-LINK Broadband Router, it can be used to achieve residential broadband or even cable television Internet sharing 1 ).

TP-LINK TL-R410 Broadband Router

I. hardware Installation

1. When you build a home network for the first time, you need to disconnect the power of all devices, including computers, monitors, Modem, and routers.

2. Connect the network cable to the network card of each computer in the LAN, while the other end of the network cable is connected to the lanport in the rear panel of the router.

Tip: The TL-R410 router has a total of 4 ports available for the client, the computer in this LAN can access these ports, no order requirements. In addition, there is an Uplink port for use in combination. Generally, this port is not inserted.

3. Connect the residential broadband network cable to the WAN port behind the router.

4. Connect the power port behind the router to the power source.

After all the hardware is installed and confirmed to be correct, turn on the power and start the computer.

2. configure a Broadband Router

1. Before configuring a Broadband Router, be sure to ask the technical staff about the relevant parameters, because the Broadband Router provides three Internet Configuration modes: static IP, dynamic IP, and PPPOE. If you are using residential broadband, select static IP and set the following parameters: static IP address, subnet mask, gateway, preferred DNS server, and backup DNS server, if you are using ADSL, select PPPoE and remember your username and password.

2. Double-click the IE icon on the desktop, enter http: // 192.168.1.1 in the address bar, and press Enter. This is the IP address of the Broadband Router. You need to enter this connection every time you access the Broadband Router.

TIPS: different brands of broadband routers have different configurations. before configuring a vro, you must read the specification of this model and set it according to the instructions. TL-R410 router factory default settings information, IP Address: 192.168.1.1; subnet mask 255.255.0; User Name/password: admin/admin.

3. After the user name and password dialog box appears, enter admin twice in the dialog box and click "OK". 2 ).

Figure 2 Broadband Router Access dialog box

Tip: If the IP address of your Nic is not in the same CIDR block as the vro, set it to the same CIDR block. Otherwise, the vro cannot be accessed and configured: select Start → settings → network and dial-up connections, right-click the network adapter, select properties, and then select Internet protocol TCP/IP in the displayed window )", click the "properties" button at the bottom of the window, select "Use the following IP Address" in the window, and fill in the IP address and subnet mask, such as 192.168.1.2, 255.255.0, etc. 3 ). If not, ask a professional technician.

Figure 3 TCP/IP attributes