Comprehensive comparison between low-end routers and high-End Routers

Source: Internet
Author: User

This article mainly introduces the comprehensive comparison of the two vrouters, as well as the working principle, performance factors, and decision indicators of the vrouters.

Low-end routers and high-end routers are still commonly used. So I have studied the comprehensive comparison between the two vrouters. Here I will share with you, hoping to help you. Recently, some netizens asked in the Forum: "low-end routers and high-end routers are similar in usage. Why is the price so far different ?" In fact, this question is very good, and many friends who are not familiar with the product technology will basically have similar questions.

"Why is this vro so expensive and cheap with the same features?" "Why is Cisco vro so expensive? And TP-LINK is so cheap ?" "The two routers have the same main parameters. Why is the performance so far different ?" To solve these problems, we must start with the basic principles of the vro:

Vro Working principle:

The simplest network can be imagined as a single-line bus. Each computer can send packets to the bus to communicate with each other. However, as the number of computers in the network increases, this is not feasible and may cause many problems:

Bandwidth Resources are exhausted.

Each computer wastes a lot of time processing unrelated broadcast data.

The network becomes unmanageable, and any errors may paralyze the entire network.

Each computer can communicate with other computers.

Network segments can solve these problems, but at the same time, you must provide a mechanism for computers in different network segments to communicate with each other, that is, to promote devices like routers: high-end routers work at the IP protocol network layer, used to forward data between subnets. Vrouters generally have multiple network interfaces, including local network interfaces and wide area network interfaces. Each network interface connects to a different network. The low-end router records the network information connected to each network port. There is also a route table in the high-end router, which records the port numbers to be sent to different network addresses. The communication information of various information services used by Internet users can all be attributed to information transmission in units of IP packets. In addition to the data information to be transmitted, it also contains the destination IP address to be sent, the source IP address to be sent, and some related control information. When a router receives an IP packet, it searches for the route table based on the destination IP address in the packet and sends the IP packet to the corresponding port based on the search result. The next IP router continues forwarding after receiving the packet until it is sent to the destination. Routers can exchange route information through the routing protocol to update the route table.

Factors affecting the performance of routers:

After the above introduction, we may not know much about the working situation of low-end routers. In fact, it doesn't matter. This is not our purpose. We mainly want to explain it to you, the working principle of the router determines that it must use a chip to complete some necessary judgment and data packet forwarding, which is done by a processor, various data packets to be processed or processed exist in the memory. Therefore, the operating frequency and memory capacity of the processor determine the performance of a high-end router to a large extent.

However, the performance of the vro cannot fully depend on the processor frequency and memory capacity. However, the performance of the vro is poor, but the performance of the vro is not necessarily good; the processor clock speed is only a performance indicator of the processor. Its bus width (16-bit or 32-bit), Cache capacity and structure, internal bus structure, single CPU, multi-CPU distributed processing, computing mode, and other indicators will affect the performance of the processor. Almost all routers use a communications-related CPU. Therefore, "using a communications-related CPU" is equivalent to saying nothing. The key lies in what kernel is used by the CPU and the internal structure. The same is true for the memory. The size of the memory does not matter. If the load is not large, there may not be much difference between the 4 M memory and the 8 M memory, therefore, it is not scientific to determine the performance of a vro Based on the memory size (of course, the memory size is good ).

Comprehensive comparison of vrouters to determine vro grade indicators:

Although it has already been said that the processor and memory determine the performance of the router to a large extent, however, the indicators that determine a high-end router grade are not them, this is why the two parameters are often not marked in the main parameters of the product. What is used to measure the grade of a router? The load capacity is also called the number of hosts. However, the number of bring-in devices is not a standardized data volume. It must be measured based on actual usage. For example, all people in Internet cafes are immersed in online chat and games, in addition, almost all data is transmitted through the WAN port of the router, so the load is very heavy. However, if it is a corporate network, most people are busy designing, writing reports, and making plans, at the same time, only a small number of people are using the network, and most of the data flows inside the enterprise network. Therefore, the high-end router has a low load, so that clients with a large load can simultaneously. If the maximum load is 253, it makes no sense, because the maximum number of IP addresses that DHCP can allocate is 254, and the number of IP addresses used by low-end routers is 253, this kind of metric cannot be called. It is basically a hit person. Therefore, we need to look at the actual load capacity of a router, rather than the theoretical load capacity.

Because of the many uncertainties and spoofing nature of the load capacity, another indicator is also quite concerned, that is, throughput. Throughput refers to the amount of data that the router can process per second. This parameter refers to the throughput of the LAN-to-WAN. The measurement result is that when NAT is enabled and the firewall is disabled, use the Smartbits and Chariot test methods respectively. When using the Smartbits method, compare the 64-byte packet test data and determine whether to compete. The Chariot test is best performed under multiple connections. Generally, you can select 100 pairs for the connection to see the differences between products.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.