Create WiFi hotspots using a wireless network card, and let your phone share the Internet

　　Step method

1, hardware installation, properly installed network card driver, as shown, we correctly installed the hardware.

2, the computer network card property settings, the following figure, we open the local connection properties, select the Advanced menu, the Internet connection to share the hook all hit.

3, and, in the selection of wireless network card for the private Internet connection.

4, after setting up, we can see that the local connection has a hand icon, that is the state of sharing.

5, then, we set up a wireless network card, open the properties of wireless network card, select the General menu, click on the properties of TCP/IP protocol, we can see that the computer has its IP address and subnet mask set well, if found, did not automatically set up, only to show that you are in the local

There was an error in the connection settings and no wireless card was set to a private connection.

6, then, we enter the properties of the wireless Network configuration menu, click the Advanced menu.

7, select the network to be accessed as "computer to computer only"

8, back to the wireless Network configuration menu, we click Add button, enter the associated option, we connect to its name-vlan, the name can be easily, preferably in English set a good password, the list set to 12345.

9, set up a good wireless network card and local connection configuration, the system will automatically pop-up said to search the wireless network signal.

10, we turn on the wireless network connection.

11, select the connection VLAN this signal point, enter the password.

12, already connected.

13, finally, we will close the firewall.

14. The test will open the WiFi function of the mobile phone.

15, enter the password

　　Attention matters

This will allow the link to succeed.