Detailed descriptions of image repair tutorials frequently used in Photoshop post-finishing

Source: Internet
Author: User

I will give you a detailed analysis of Photoshop software and share with you the tutorials on image repair that are frequently used in later stages.

Tutorial sharing:

Method 1: Lightroom, PSCC, and Camera RAW (recommended)

The biggest advantage of this method is that all parameters are placed there and you don't have to remember any shortcut keys ~ It is convenient and has little damage to image details.

 

First, adjust the exposure. Generally, when taking a very important photo, the photo will be shot with a slight halving of the file, because this will keep more details. After the video is hacked, it can be highlighted. After the video is shot, it is hard to find it. (Although sometimes the models say how you make me so dark and ugly...) then highlight the shadows and black, increase the details, reduce the skin light, and make the skin look more soft and tender

Because the yellow skin is orange, increasing the brightness of the Orange, reducing the saturation can effectively brighten the skin color.

A slight increase in red saturation can make the skin more transparent and healthy

You don't have to worry about LR, CameraRAW, or low PS versions.

 

Another method is to directly increase the brightness in the PS relay height curve, and then adjust-optional color-red and yellow respectively.

The use of curves should be practiced slowly ~ If used properly, it will be of great help to dimming and color.

 

 

Imitation stamps are responsible for repairing hair and intractable impurities! The combination of transparency can also be used for skin polishing

Patch tools can remove some beans, freckles, chopsticks and so on. The computer will automatically handle them, but the results are often unsatisfactory. Patch tools will let you select a piece of skin for reference, the calculated results are much better.

But! Recently I found the stain removal tool in the PSCC RAW filter !, The calculation result is quite good. You can also choose to copy the source skin. The third tool is recommended here ~

 

The tip is that the paint brush should be as small as possible, and the acne is generally the best. The most important thing for dirty fixing is not technology, but patience.

Is there an impulse to turn it off ?~ It doesn't matter. It's more difficult to be at the back ~

 

I think this step is called makeup because we can use this step to change a lot of face details, that is, today's top priority. It's hard to find it ~

 

The first method:

 

Modern people's aesthetic to the face is basically closer to that of Westerners.

Here is a reference to my goddess, Audrey Hepburn.

 

Some Western people face some skeleton features, such as full forehead, clear eyebrow, eye nest, high nose, eye, facial clear three-dimensional are beautiful standards. So what we need to do is:

 

 

Create a new layer, fill in 50% gray in the blending mode

The paint brush uses the soft angle pressure, the transparency is 30%, the traffic is 10%, respectively, use white and black to "makeup" the face"

1. Raised forehead

2. Highlight the middle of the nose on both sides of the nose.

3. Crush the dark eyebrow, nose bottom, and lip bottom to make the facial features clear and three-dimensional (in the case of top light ).

4. Highlight the cheekbones and hide the cheeks to make the face look thin

5. Highlight the edge of the nose and the regular lines, eye and neck lines

6. Draw unnecessary light and shade on the skin to make the skin look smoother

7. Removal bags, horizontal silkworm eyes, and even eye bags

 

This is my most common method. It is very convenient to switch between black and white. You can also keep the vast majority of skin details, but some areas that are too bright and dark will look a little weak, the painting is too dark, and there is no skin color.

In addition to moderate gray, you can use the second more refined method.

 

 

Create two new curve adjustment layers, one named as the white curve to pull up, create a layer mask filled with black; one named as the black curve to pull down, create a layer mask filled with black. Use only the white soft angle paint brush, and draw with a transparency of 30% traffic of 10%,

 

The rendering principle is the same as that of the moderate gray method. However, the adjustable range of colors is greater than that of moderate gray, and skin details are kept to the maximum extent. The only drawback is frequent switching between two layers? (? ^ ?)?

 

The magazine advertisements we see are made out of the pores of stars with super smooth skins.

Of course, what should I do if the first two are too difficult and too professional?

 

Finally, let's talk about the simplest and most crude method of skin modification, which can be omitted even if it is so rude... It is the most commonly used skin polishing method in a small photo studio. It is also a common "skin polishing command" program for various Meitu software. It doesn't matter if you don't understand it ~ Not everyone needs to refine their photos ~

1. Use a free plug-in tool to create a mask for your face and leave it blank.

2. Press CTRL + J to copy a mask.

3. Filter-Blur-Gaussian blur-5 ~ 10 pixels

4. Use an eraser to wipe out unnatural areas, such as hair nearby, near cheek, nose, eye and mouth.

5. The transparency of the mask layer is reduced to 70%.

This method will cause great loss of skin details and basically invisible pores ~ However, it doesn't mean that they can't be used. Normally, when there is a very small proportion of people standing in the picture, HaoGe will steal a lazy ~ Or when the pixels in the photo itself are not high, I will be too lazy ~~ It's really simple and rude ~~~~~~~~~~

 

Also called liquefaction ~ It's also called face slimming ~

The liquefaction command in the filter menu is really a blessing for fat girls ~

Remove your big arm and neck, and use it for wide-faced and wide-sized eyes and wide-mouthed eyebrows. Here we will focus on the underarm, temples, nose wings, and biting muscles, also, do not turn the black eye out ....

 

Many friends think that this command is especially difficult to use, because you have not clicked on the advanced mode, and the paint brush pressure is too high. Hao's general brush pressure is set to around 15, I think this value is better controlled.

Fine-tune the color, sharpen it, and finish it ~~~

Ma said that all those who can read this have the potential to become masters !~

 

All right, the above information is the full content shared by the series of detailed portraits frequently used in image repair tutorials for later refining for Photoshop users, users now see the small editor here. I believe that it is very clear about the later refinement method, so you can try it by yourself according to the small editor's tutorial.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.