one, virtual machine VMware in three ways to access the principle of1 Bridging (bridged)
in bridging mode, VMware Virtual operating system is like
a separate host in the LAN , it can access any machine in the network, but you need more than one IP address, and need to manually The virtual system configures the IP address subnet mask and is also in the same network segment as the host machine, so that the virtual system can communicate with the host machine. If you want to use VMware to create a new virtual server within the LAN, to provide network services for LAN users, you should choose Bridging mode2 Network Address translation mode (NAT)
The use of NAT mode is to let the virtual system with NAT (Network address translation) function, through the host machine on the network to access the public network, that is, the use of NAT mode can be implemented in the virtual system access to the Internet, Nat mode virtual system of the TCP/IP configuration information is by VMNET8 (NAT) virtual network is provided by the DHCP server, can not be manually modified, so the virtual system will not be able to communicate with other real hosts in this LAN, the most advantage of using NAT mode is that virtual system access to the Internet is very simple, you do not need to do any other configuration, Only the host machine can access the Internet toIf you want to use VMware to install a new virtual system, you can directly access the Internet without any manual configuration in the virtual system, it is recommended that you use NAT mode3 Host mode (HOST-ONLY)
in some special network debugging environment, the need to isolate the real environment and virtual environment, then you can adopt host-only mode, in host-only mode, all virtual systems can communicate with each other, but the virtual system and the real network is isolated. If you want to use VMware to create a virtual system that is isolated from other machines in the network, you can choose Host-only mode for some special network debugging work. second, set up three network of virtual machinefirst look at Win7 in the VMnet0, VMnet1, VMnet8 these three networks, if not, please follow the following way to setfound in virtual machine: Edit---> Virtual Machine Network Editor, open can appear
through, we can see VMnet0 corresponds to the bridge mode, VMnet1 corresponds to the host mode, VMnet8 corresponding to the NAT mode.
host mode is not available for Internet access. Only bridging and NAT mode are available online. third, through the bridge to connect the Internet1, Edit---> virtual Machine Network Editor, select VMnet0, and then in Vmnet information, select can host to the Virtual Machine Bridge network card, as shown, click should, OK
2, Virtual machine--set--Network adapter--Select bridge mode
3. Then start the virtual machine, start the Mac, set up the network
Note: Here the IP address, must be with the host's IP address on the same network segment, my host IP is as follows
Iv. surfing the Internet by means of Nat1 Set local connections on this computer so that they can be shared as shown in
2 in the Virtual network editor, set the VMnet8 subnet as follows
3 Set the virtual Mac system to NAT Internet mode
4 Set the network in the MAC system to the following form
Donate US
The Mentor Studio has been working to help programmers learn to program more quickly and easily, and if you agree with our results and feel helpful, you are welcome to donate ^_^ to us.
1-1 win7 vmware virtual machine in Mac system cannot surf the internet
