Bacula Client Configuration under Windows

Before encountered the same problem, is the FD configuration file without errors, but is not backup, forget is God horse principle, anyway in hotsts file inside add a *.*.*.* bacula_storage on OK.

Make a note first, it's a good head than a rotten pen!!!

The reason here is that the address of the storage set in the Dir configuration file is a host name, not the IP address used, because there is no DNS or WINS resolution, so you can only use the hosts Dafa. This is the beginning to solve the problem of WAN backup, the time is long forgotten. There is no problem with using IP addresses in a common LAN, but when it comes to WANs, you must use a domain name.

# Definition of file storage device
Storage {
Name = File
# don't use ' localhost ' here
# Address = 192.*.*.* # n.b. Use a fully qualified name here
Address = Bacula_storage
Sdport = 9103
Password = "n2pw423brgfnapw23d23fx/ouffgsfd7n77b3232z8zglwwig27l"
Device = Filestorage
Media Type = File
}

Bacula Client Configuration under Windows