Computer frequent automatic shutdown solution 2

 

Previous http://www.bkjia.com/ OS /201112/113821.html

 

The failure that causes irregular system restart and shutdown mainly includes the following reasons:

 

 

I. first, we need to deal with the possibility of "My computer press" Right button --> properties --> advanced --> press "Start and repair" --> put the following "system failure" box deselect the three options. after the three options are canceled. it can solve most people's problems.

 

2. If the system shuts down automatically and a dialog box is displayed, the virus is very likely. Solution: anti-virus.

 

III. WINDOWS Startup Program error. If WINDOWS is started by default, a program running error occurs, the system restarts, and a program with an error is loaded, if a program has serious errors in the startup item, the system will start the program repeatedly. Solution: Press F8 at system startup to enter safe mode. Select "Start and fault recovery" in Control Panel> system> advanced ", finally, remove the "auto restart" check box under "system failure.

 

4. Use an optical drive or a soft drive to shut down or restart the instance. If a hard drive is attached to another disk, power is often unavailable. The power supply may be faulty. Solution: Change the power supply.

 

5. Currently, the main board usually has a temperature protection control chip to prevent CPU overheating and burning. Sometimes the CPU warning temperature in the BIOS is set too low. When the temperature exceeds the warning temperature when the CPU is fully loaded, the system will automatically shut down. Of course, the CPU temperature is too high due to the poor heat dissipation of the chassis, and the unstable operation will also cause the system to restart. Solution: Adjust the protection temperature to a proper temperature in the BIOS to enhance the system heat dissipation.

 

6. Watching a specific film will crash. It will be okay after restart. The problem is the problem of the video card driver. Solution: Download the most stable driver version.

 

7. when a large 3D game or system process is running for a long time, the system is often started, which is quite common. dual-channel is used for multiple systems. If the quality and performance of the two memories are significantly different or the electrical stability of the memory stick cannot meet the dual-channel requirements, the system may not run stably, when a large program is running, it is often restarted due to a fault. solution: Increase the CL value of the memory in the BIOS. For example, if the CL value of 2.5 is changed to 3, you can adjust the channel speed to lower the system bus speed, if this trick fails, most of them will change the memory.

 

From sunstars2009918