If you choose to purchase an External Optical Drive, you should check the following USB installation method:
Step 1-create a USB boot disk
1. First you have to have a USB flash drive.Kingston8 GB disk
2. Insert a USB flash drive(Assume thatGDisk)
3.Run "command line" as an administrator"
4. Enter the following command and press enter to obtain the serial number of the USB flash drive.
>Diskpart
>List Disk
We can see myUThe disk serial number is1
5. Enter the following command to format the USB flash drive.
>Select Disk 1
>Clean
>Create partition primary
>Select partition 1
>Active
>Format FS = NTFS
>Assign
>Exit
6. Use daemon tools or similar tools to load Windows 7 images
7.In the command line, locate the location of the system installation file to be installed (for example, the system loads the image fileE:) In the command line, enterE:You can jumpGDisk, enter"CD boot"EnterBootFolder.
8.Under the command line (directoryG: "Boot>)Use the bootsect tool to set the USB flash disk as the NTFS startup Item and runThe following command
>Bootsect/nt60 G:
9. Close the commandLine
Step 2-copy the installation file to the USB flash drive
Use the resource manager to copy the installation file instead of the image.
Part 3-SetUInsert the disk into the computerInstall On
1. Insert a USB flash drive and enable netbook
2. Set the USB flash drive as the boot item
3. Normal Installation