Telecom, Unicom Broadband can not share the solution to the Internet

There are still some places in the telecommunications, Unicom, CRC broadband operators will be limited to the Internet router sharing, so as to prevent a broadband line by several households shared. But such a practice will have more than one computer or other Internet equipment to create a family of trouble, in fact, can be cloned MAC address to solve this limitation, the following will give you one by one.

Recently, a friend said, his family's routers are telecommunications prohibit many people to share the Internet, do not know how to do it, because his home has 2 computers, need to surf the Internet. If every computer pulls a broadband Internet connection, it's a loss.

For telecommunications, Unicom router approach, we have a lot of opinions, there is no solution, the result is still the case.

When we express our indignation, we might as well look for solutions that have no solution. Here, I will teach you how to break through the limitations of telecom Unicom to share Internet access to routers!

Cloning MAC address and realizing the method of sharing Internet with router

A Mac (Media Access Control) address, called a Mac location, or hardware site, used to define the position of a network device. In the OSI model, the third layer of the network layer is responsible for the IP address, and the second layer of the data link is responsible for the Mac site. Therefore, a host will have an IP address, and each network location will have a dedicated Mac site.

First make sure that the computer that applies for the Internet has been able to surf the Internet. This means that the MAC address of the computer's network card is a valid MAC address. Enter the MSDOS mode of the system, release the Ipconfig/all command, you can find the computer network card MAC address. For example: 00-50-8d-d1-78-a7.

Then look for a valid MAC address, unplug the foreign leader from the NIC on the stand-alone computer, plug into the WAN port of the broadband router, and connect the NIC of multiple clients to the LAN port of the broadband router. Turn on the power to the broadband router. Start IE on any client computer that is connected to a broadband router. Type the IP address http://192.168.1.1 for this broadband router in the address bar of the IE browser. Go to the router's Web Settings page.

Click the Network Parameters button in the left window of the configuration page to select the MAC Address Clone button. A window with MAC address cloning appears. In the current management PC's MAC address window, fill in the "legitimate MAC address" found above: 00-50-8d-d1-71-a7. Click the MAC Address Clone button and the MAC address will be filled in the MAC address window. Finally, restart the router for the settings to take effect.

To implement the MAC address cloning function is simple, only on the computer that is bound to enter the broadband router, wireless router Web Settings page, find the "WAN" or "clonemac" option, select "Clonemac (MAC address clone)", You can clone the MAC address of the current computer's network card to a wide area network (WAN) port on the router. After saving, restart the broadband router, wireless router can be normal multiple computer sharing surfing the Internet.

This allows the router to obtain a valid MAC address that is bound by the ISP. Can realize many computers to share the Internet. Experience has shown that the local area network of all computer network card to modify the MAC address can also share the Internet.

Note:

1, each computer can be the internet alone.

2, each network card must carry on the operation (the notebook has two network cards--wired and wireless)

3, each network card or computer is best to connect the router alone, bar other computer shutdown.

4, every save once, restart the router.