Vista/windows 7 Common blue screen fault analysis

Source: Internet
Author: User
Tags error code firewall

Vista/windows 7 Common blue screen fault analysis





through Debugging tools analysis blue screen failure case:





once had a Windows XP computer that often had a blue screen failure with an error code of 0x0000007F for unknown reasons. To investigate the cause of the failure, we set up a save small memory dump file (64KB) in Windows XP. After the computer has 0x0000007F blue screen failure again, we opened the computer in the Windowsminidump folder using debugging Tools after restarting Windows. DMP memory dump file, debugging Tools after automatic analysis pop-up analysis report, report this error probably caused by TM_CFW. SYS (possibly by TM_CFW. SYS). Originally, TM_CFW. SYS is located in the%systemroot%system32drivers folder, which is a trend firewall program that is used to load a trend firewall with Windows startup in the form of a system service. As we recall, this computer is a frequent 0x0000007F blue screen failure after modifying the settings of the trend firewall program. As a result, the trend firewall is likely to have a problem with improper setup. To confirm this conjecture, we uninstalled the trend firewall in Windows XP through the Add-Remove Program in Control Panel, then reinstalled it by default, and the problem was solved.





Appendix: 28 Common blue screen fault code troubleshooting information





Error name 0x0000000a:irql_not_less_or_equal





Fault Analysis 0x0000000A error indicates that there is an excessively high level of process internal request (IRQL) in kernel mode to access the memory address that it does not have access to. This error is typically caused by a bug in the driver for the hardware device and some software or hardware that is incompatible with Windows. If you encounter a 0x0000000a error, it is recommended that you try to start Windows with the last Known Good configuration and check for any recent installation or upgrades of any system updates, drivers for hardware devices, BIOS, firmware, and applications. If so, please uninstall the recently updated application software and hardware, and restore to the previously stable version to see if the problem can be solved.





Error name 0x0000001a:memory_management





Fault Analysis 0x0000001a error indicates that memory management is experiencing a problem. This error is usually caused by a faulty hardware device. If you encounter a 0x0000001a error, it is recommended that you check if you have recently installed a new hardware device or driver. If so, uninstall the most recently installed hardware device or driver, and see if the problem can be resolved. Also, if you encounter a 0x0000001a error while installing Windows, check that your computer's memory capacity and specifications meet Windows requirements.





Error name 0x0000001e:kmode_exception_not_handled





Fault Analysis 0x0000001E error indicates that Windows detected an illegal or unknown process directive. This error is typically caused by a memory failure, or similar to a 0x0000000a error, which means that in kernel mode there is an excessively high level of process internal request (IRQL) to access the memory address that it does not have access to. If you encounter a 0x0000001e error, it is recommended that you first check software and hardware compatibility to see if any new applications, hardware devices, or drivers have been installed recently. If so, please uninstall the recently installed software and hardware to see if the problem can be solved; second, please check the blue screen fault prompts whether the problem is caused by the Win32k.sys file, if so, it is likely that the remote control class software caused by the fault.





Error name 0x00000023:fat_file_system





Fault Analysis 0x00000023 error indicates a problem with a disk drive with a fat, FAT32 file system. This error is typically caused by a failure of the disk drive itself, such as disk errors, file errors, excessive disk fragmentation, too frequent disk reads and writes, files with large volumes, and damage to the interrupt Request packet (IRP). If you encounter a 0x00000023 error, it is recommended that you first perform a full test of all disk drives to see if there is a disk drive or a file error, and then temporarily turn off all software that may be in the background to manipulate data in the disk drive, such as antivirus software, Data backup software and so on; second, please follow the Sfc/scannow command to check whether the Windows system files%systemroot%system32driversfastfat.sys damaged or missing; Finally, reinstall the SATA or IDE controller drivers provided by the motherboard driver in Windows.





Error name 0x00000024:ntfs_file_system





Fault Analysis 0x00000024 error indicates that a disk drive with the NTFS file system has encountered a problem. This error is typically caused by a failure of the disk drive itself and is basically the same trigger as the 0x00000023 error. If you encounter a 0x00000024 error, you can refer to the 0x00000023 error solution. When checking system files, check to see if the%systemroot%system32driversntfs.sys is damaged or missing.





Error name 0x0000002e:data_bus_error





Fault Analysis 0x0000002e error indicates a problem with parity check of system memory memory. This error is generally due to memory failure (including system memory, video memory, various caches), hardware device drivers trying to access the wrong memory address, the computer has been viruses, trojans, spyware, adware, rogue software and other malicious programs such as the attack caused by. If you encounter a 0x0000002e error, it is recommended that you first perform a full test of all disk drives to see if there is a disk error or a file error in the disk drive, and then perform a comprehensive check of your computer to see if the computer has been infected with a virus, Trojan, spyware, Adware, Rogue software and other malicious programs attack; second, please use the memory detection software for memory stability and compatibility testing, recommend the use of Windows Memory Diagnostic, memtest and other detection software; Finally, open the chassis and check to see if the hardware device is securely connected.





Error name 0x0000003f:no_more_system_ptes





Fault Analysis 0x0000003f error indicates that memory management is experiencing a problem. This error is generally due to memory performing the wrong I/O (input/output) operation, a bug in the hardware device driver incorrectly using memory resources, an application software was incorrectly allocated a large number of kernel memory, and other reasons. If you encounter a 0x0000003f error, it is recommended that you check to see if a new application or hardware device driver has been installed recently. If so, uninstall the recently installed application (especially the disk optimizer and antivirus software) or the driver to see if the problem can be solved

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.