window7 Pure Drive installation via U disk boot:the system prompts that Setup cannot create a new system partition or locate an existing partition, causing the installation to fail.
Workaround 1:a very simple approach, you first need to reformat the C disk. After formatting, do nothing, pull the USB stick out, and then plug it in. Click on the refresh, this time, select the C drive, click Next, should be successful.
Workaround 2:1. Prepare the following toolsuse the Chinese cabbage and the like to make a win PE u disk boot disk. an ISO image file for the Win7 to be installed.
2. Plug in the USB drive and boot into win PE
3. Use the virtual optical drive software in win PE to load the ISO file for Win 7. 4. Format the target partition C drive to install the Win7 system, copy the Win7 folder from the virtual CD-ROM "boot, sources, bootmgr" to the C packing directory respectively.
5. Run the "C:\boot\bootsect.exe/nt60 C:" Carriage return from the Start menu. command, "/nt60" before and after there are spaces, you need to pay attention to. when we enter, the execution interface flashes so that we can't see anything.
6. Unplug the USB drive, restart the computer, the system began to perform the installation. Before the problem has disappeared, start to enjoy the quiet installation. PS:one said that after entering the Windows installation interface, delete the 3 folders that were previously copied to the C drive via the command line.
PS2: In practice, the 6th step, the system did not start to perform the installation. tip: "Reboot and select proper boot device or insert boot media in selected boot device and press a key" It may be that the C drive is not out of the active state, workaround:1. Enter the PE system and open theDiskgenius, Diskgenius will prompt if it is not active. Repair. Save, exit, restart.
after the installation is complete, you can delete the sources directory that was previously copied from the C drive .
Null
Windows 7 installation prompt: Setup was unable to create a new system partition