Windows Server 2008 IE cannot adjust security-level solutions

By default, when you use the Internet Explorer from the Windows Server 2008 system to access the Web page content, we often find that the page content is not fully displayed. Later, when we went into IE browser's Internet Options Settings dialog box to view the security level of IE browser, we found that the security level of Internet zone is highest, and in that state, ie browsers often prohibit many content to display normally.

After finding the cause of the failure, it was hoped that the security level of the Internet zone would be reduced, but when we tried to modify the security level parameters of the Internet zone, we found that the security level could not be lowered. How do we reduce the security access level of the Windows Server 2008 system with IE browser?

The main reason for this failure is that the Windows Server 2008 system has added the IE Enhanced Security Configuration feature, which is enabled by default, and we are not at liberty to change the security level on the Internet Explorer security zone. To change the security level on the IE security Area yourself, just follow these steps to cancel the enabled state of the IE Enhanced Security Configuration feature:

First, close all open IE browser windows in the Windows Server 2008 system environment. Then click Start/Program/Administrative Tools/Server Manager, and in the Server Manager window that pops up, locate the security information settings item and click Configure the IE ESC option to open the IE Enhanced Security Configuration window as shown in the following illustration.

Under Administrator, select the Disable option, and under Users, select the Disable option, and then click OK, and then the Windows Server 2008 Server system temporarily shuts down the IE Enhanced Security Configuration feature.

When you need to enable the IE Enhanced Security Configuration feature of the Windows Server 2008 system in the future, we can select the "Enable" option under Administrator or user options in the configuration window shown in the previous illustration, and finally click the OK button.

Original