Windows XP Connectivity WiFi Tutorial

1. Open the network connection (you can find in the beginning, you can also enter the network neighbor Point Connection), point "local connection" (or you connect the network connection), right key properties, into the Advanced tab, Internet connection to share the first hook.

2. Then configure the wireless network connection, the same right key properties, here than the local connection one more tab: Wireless network configuration. If not, provide two ways to solve: 1, in the command line cmd input net start wzcsvc;2, start-run-enter services.msc, and then find the service Wireless Zero configuration, start it. You can take one of two methods. Next, go to the wireless network configuration, "Use Windows to configure my wireless network Settings" to hook, "preferred network" point "add"

3. Fill in the SSID, is your wireless network name, automatically provide the key to remove the hook, fill in 5 or 13-bit password, and then determine

4. Wireless network configuration under the "Advanced" option to enter, as shown, select "Computer to Computer only", point "off"

5. In fact, the basic configuration is complete, but in case of some additional problems, here is a mention, the local connection and the wireless network connection of the firewall to shut down, otherwise the mobile device will not be connected, the installation of their own firewall in the connection to the mobile device also shut down, such as the following figure in my Computer configuration of the ESET Personal Firewall's hook was removed by me. If your mobile device is not connected later, it is usually caused by a firewall.

6. The following image shows the example network just set up, point connection, and then the network will appear after you open WiFi search on your mobile device, and then you can enter the corresponding password.