Wireless Internet access without wireless router

In the hotel or in the school when the Internet, perhaps only a network cable access mode, and no wifi, this time if you want to let the phone or tablet computer online, it is not so easy, can only burn 3G traffic or poor edge traffic. What if you have a portable cable-free connection? If the network wire needs to be dialed, such as Ruijie or dr.com in the school, a wireless router is probably not available via WiFi. The end of the solution in fact do not use a router, and even do not need to spend more money, just to have a wireless network card with a computer installed on the phone, the tablet computer share the Internet.

Share a wireless network with features from Win7

Advantages: The system does not have to install a separate program

Disadvantage: Android phones are not directly identifiable

Step 01

After connecting to the wired network in Windows 7, right-click the "Network Connection" icon in the tray area on the right side of the taskbar to open the network and Sharing Center. You can also open the Control Panel from the Start menu and access the network and Sharing Center from the control Panel.

Open Network and Sharing Center

Step 02

At the bottom of the main window, locate the "set up a new connection or network," and click on it. In the pop-up window, locate the set wireless temporary (computer to computer) network through the Drop-down menu. This network is actually AD-HOC network, if the notebook is using Ubuntu system, then the share created through the network manager is also Ad-hoc network. Android phones basically don't recognize this kind of network, and the way we're going to do that is later mentioned.

Set up a temporary wireless network

Step 03

Set Network name, network name please use English and number, try not to use Chinese and special characters, because some mobile phone may not recognize the Chinese SSID. Then set the security type, use WPA2 encryption, and then set a password that is long enough and complex. Recommended password protection numbers and letters, preferably with special characters, longer than 8 bits.

Www.wzlu.com Path Studio www.wzlu.cc Set wireless parameters

Step 04

All the way "next" to complete the setup. You can then search for and join the wireless network in other notebooks. Need to be reminded that the coverage of this network than ordinary wireless router coverage is much smaller, may be separated from a wall signal will be weakened to the Internet, so the Internet equipment please try to close to ensure that there is enough signal strength.

Equipment not too far away

Step 05

Back up files first

We mentioned earlier that the popular Android phone does not recognize the AD-HOC network, and here will tell you how to solve the problem. The solution is that the cell phone has "root" access to the highest level, and the root Explorer File Manager has been installed. Then download the cracked wpa_supplicant file. Please

Note that different system versions require wpa_supplicant files that may not be the same, so before overwriting, please back up the original files.

Step 06

Run root Explorer on your phone (called the RE manager in your phone), and then go to the/system/bin folder and mount it as read and write. Then back up the original file and cover it with the downloaded cracked file. It is recommended that you restart your mobile phone to recognize the AD-HOC network. If there is a connection problem or you simply cannot find all the wireless access points, restore the original wpa_supplicant.

Click on the upper right corner of the "load read and write", when it becomes "mount Read Only" when to cover

Tip: There are quite a number of versions of the Wpa_supplicant file on the Web, different system versions of the applicable files are not the same. Even some of the hottest models have dedicated files. If the phone is more unpopular, then you can only try it yourself. Remind everyone again, must back up the original file before overwriting, otherwise may not be on the net OH.

Using Third-party software to create a wireless network

Advantages: Wide application surface,

Mobile phones can be used without cracking

Disadvantage: Need to install software to use

Step 01

We use the Connectify software to achieve network sharing. Software Division Pro and free version, we use the free version on it. There are other software to use, but if you choose other software, please note that the virtual network can not be Ad-hoc network, or mobile phone can not search the network. First install the software, the installation interface is in English, but the software will automatically install. After installation, you need to reboot your computer to use the software.

Www.wzlu.com Path Studio www.wzlu.cc need to reboot after installation

Step 02

After the reboot, the software will run automatically. The free version can be used in the pop-up window by clicking on "Use release". If you have a serial number to enter the serial number, you can go to advertising and get the Pro version of the right to use. As for how the serial number is obtained, it is not too difficult for us to think about. In fact, the use of free version is enough.

You can use the Free edition

Step 03

In Settings, set the SSID (Hotspot Name) and password (Password) to select a wired connection to the Internet in the Internet. If you have more than one wireless network card, select the wireless network card that you want to use to share the Internet in WiFi. Select the encryption mode in security mode, select Acess point Wpa2-psk. Finally click "Start Hotspot" to start sharing the Internet.

Set Wireless parameters

Step www.wzlu.com Path Studio www.wzlu.cc

By clicking on the "Services" and "Clients" tabs, you can see that the software provides a number of features, such as firewalls, file sharing, and so on, but it is labeled "Pro", which means that only paid versions can be used. These features are required, please upgrade to "Pro version".

upgrades to Pro can achieve more versatility