Force 10 switch initial configuration document

Source: Internet
Author: User

Force 10 vswitch initial configuration document 1. preparation. When the Force10 switch arrives, all ports are disabled by default. You need to go to the switch through the serial port to enable the switch. Serial port login parameters: baud rate: 9600 data bit: 8 parity verification: no stop bit: 1 Data Flow Control: No www.2cto.com 2. Open all ports step. 1. Press enter to enter the vswitch. 2. Enter enable to enter the permission mode. 3. Enter configure to enter the configuration mode. 4. Enter interface range gigabitethernet 0/1-48, enter port 1-48 of the G0 slot, and configure the 48 ports in a unified manner. 5. Enter no shutdown (or no shut) to enable the port. 6. Enter switchport to change all ports to L2 ports. 7. exit the permission mode twice. 8. Enter show running-config to view the status of the current vswitch ports. All ports should be no ip address, that is, no IP address is configured. Switchport, which is a layer-2 port. No shutdown, that is, the port is enabled. The file only contains Vlan 1, untagged Port 1-48. 9. Enter write memory to save the current configuration www.2cto.com. 3. Note. 1. After all the configurations are completed, write memeory must be used to save the configuration. Otherwise, after the switch is restarted, all ports return to the disabled status. 2. The Force10 switch is slow to start up. It takes about 3 minutes to start up and open all ports. 3. All vswitches in this article have 48 ports. If the number of interfaces is incorrect, modify them. 4. If all ports are enabled (the indicator is normal after the switch has a network cable inserted) but the network is disconnected, check whether the port is a switchport.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.