Great Wall Broadband Router settings for Internet sharing

This article sets up great wall broadband to enable Internet access. It mainly sets the WAN port and some basic connection configurations to achieve Internet sharing.

1. Go to the Great Wall Broadband Router Management page through the WEB. Open a browser and enter the vro's Great Wall broadband Intranet IP address, which is also the LAN port IP address, generally 192.168.1.1 or 192.168.0.1) in the address bar ), this IP address is the Great Wall broadband GATEWAY of the computer in the Great Wall Broadband LAN. You can enter IPCONFIG in the command prompt to check the GATEWAY ).

2, enter the user name account to log on to the Great Wall Broadband Router) and password to enter, take TP-LINK541G as an example ). If you have not changed the account and password, please refer to the vro manual to find the default account and password. If you have changed the password but have forgotten it, you can follow the Great Wall broadband manual to restore the factory value. Tip: Generally, it takes a long time to restore the factory value or press the RESET key on the Great Wall Broadband Router continuously.

3. on the Great Wall broadband management page, find "WAN Port Settings" or "Network Parameters", select "PPPOE", and enter the correct Great Wall Broadband User number and password, save and click "Connect" to restart a vro ).

With this configuration, you can use multiple computers to share the Internet at the same time!