How can I share a wired and wireless hybrid route for Internet access?

A home dual-host network composed of wireless routers, laptops access the Internet through wireless, while desktops access the Internet through the exchange port of the wireless router. Set the notebook IP address to 192.168.0.2, the gateway address to the route address 192.168.0.1, the desktop IP address to 192.168.0.3, and the gateway to 192.168.0.1. The two machines are in the same working group, but why can't the other machines be seen in the network neighbors? How can we make the two machines completely access each other?

I. Necessary settings and check

To determine the cause of the fault, perform the following checks before conducting other checks.

If you still use Windows 98 and other operating systems, you can perform the following checks to open "My Computer> Control Panel> network ". Then, select the Add button and select "file sharing for MICROSOFT Network and printer" in the "service" column ". Then, select "attributes" in the "Network neighbors" icon and select the "ID" option in the "network" dialog box that appears. In the "Working Group" input box, make sure that the two computers are in the same working group (the working group name is the same). The "computer name" is different. Select "Windows login" in the login mode so that the two can see and share data in the network neighbors.

Of course, as long as the hardware configuration is not very low, many users have begun to use mainstream operating systems such as Windows XP. In such systems, if the two servers share the internet, they will not be able to see each other on their network peers. Perform the following checks:

First, you need to determine whether the names of the two computers are set to the same. Some home users often ignore this when installing the operating system. To change the computer name, open the "my computer" property, click the "computer name" tab, and then click "change ". In the "computer name" box, type different computer names, such as A1 and A2, and enter the same name for the two computers in the "Working Group", such as 168, click OK ".

In addition, if you have not logged on to the network, click Start and then logout ". Click or enter the user name. If a prompt is displayed, enter the password to log on to the network as an administrator.

If you only want to share files on the other server, after setting file sharing, you can open "Network neighbors", select "entire Network", and select "MICROSOFT Windows Network ", the workgroup name is displayed. Open the workgroup name and you will see the shared folder or disk. You can also directly click Start> Run and enter \ computer (computer name) \ share (shared folder name) \ to open the shared folder.

II. Key Points of Basic settings

If the name of the other computer cannot be visible to each other directly on the network neighbors after the above settings, you need to use the "Network Installation Wizard" to solve the problem. The Network Installation Wizard provides software that allows you to set Windows XP-based computers to be used on a small home network. In addition to setting Internet Connection Sharing, the wizard can also set the computer name, computer description, and workgroup name, file and printer sharing.

Open "Network neighbors", double-click to open "Network Installation Wizard", "Next ". In "do you want to use a shared connection", select "no". Let me select another method to connect to the Internet ". On the "select connection method" Page, select "this computer is connected to the Internet through a residential gateway or another computer" and click "Next ". In "Provide description and name to this computer", give the computer an easy-to-remember "computer name", such as A1, and ensure that the names of the two computers are different, the "computer description" can be entered at will, and then click "Next ".

On the "Name your network" Page, enter the same working group name for the computer in the LAN, for example, 168, and click "Next ". On the file and printer sharing page, select enable file and printer sharing (Windows Firewall is configured to allow file and printer sharing on the network )", enabling file and printer sharing will allow everyone on the network to access the "shared documents" folder, and everyone can access the "shared printer", "Next ", the Wizard will configure network sharing for this computer.

Finally, on the quick completion page, select "finish this wizard, I don't need to run this wizard on other computers" in "create network and Install Disk" and other options ", click "finish.

The setting method of another computer is the same as that of the same method. You only need to set "computer name" to a name different from that of A1. for example, A2. After the computer is restarted, the names of the two computers in "Network neighbors" will be displayed directly after several seconds.

Open a computer name of "Network Neighbor", and the "Shared Files (including shared videos, shared images, and shared music)" of the computer is displayed directly. If you move or copy a file or folder to a shared document, anyone with a user account on your local network and computer can access it.

To share a drive or folder on the Network (you cannot Log On As a guest), open Windows Resource Manager and locate the drive or folder to be shared. Right-click the drive or folder and click share and security ". If the drive is shared, on the share tab, click here if you are aware of the risk but want to share the root directory of the drive ".

Iii. Other classic problems

After the above settings, in the LAN connected through a wireless router, the two computers in the network neighbor can see each other and share each other. If you still cannot see each other or share files, pay attention to the following points:

First, pay attention to the firewall. Run the ping command to Ping the IP addresses of other hosts and check whether the connection to other computers is normal. After the Win2000/XP/2003 system is installed, two user accounts will be created by default, namely, Administrator (System Administrator) and Guest (Guest Account, you cannot create shared folders. Third, adding the NetBEUI protocol can solve the problem of mutual access and firewall problems.

Check whether NetBIOS on TCP/IP is enabled. You can open "Network Neighbor" and "properties", double-click "Internet Protocol (TCP/IP)" on the "General" tab, and click "advanced" in the lower right corner, go to the "Advanced TCP/IP Settings" dialog box, select the "WINS" tab, and select the "enable NetBIOS on TCP/IP" option under "NetBIOS Settings" (if the LAN uses the DHCP service, select "default ").

However, if a host with Windows 2003, XP, and is installed, although the host with Windows 98 can be found in "Network neighbors", it cannot be accessed, this is because "allow other users to access my files" is not enabled in Windows 98. Enable this option.

By default, Windows XP requires all users to use the "Guest" account when accessing the computer over the network. This approach aims to prevent Internet hackers from using a local administrator account without a password to log on to and access the system. If your XP does not enable the Guest account by default, enable the Guest account. You can find the "Guest" account in "Control Panel> Administrative Tools> Computer Management> local users and groups> Users" and Right-click the account to open the "Guest properties" dialog box, remove the check mark on the "Account Disabled" check box.

When you enable the Guest account but still cannot access it at all, please check whether the setting is to deny the Guest access to the computer from the network and remove the restrictions on the Guest account, click Start> Run. In the run dialog box, enter gpedit. msc, open the Group Policy Editor, select Computer Configuration> Windows Settings> Security Settings> Local Policy> User Rights Assignment, and double-click the Deny access to this computer from the network policy, delete the "Guest" account. In this way, other computers can use the Guest account to access the computers using the Windows XP system over the network.

In the Group Policy Editor, select "Computer Configuration> Windows Settings> Security Settings> Local Policies> Security Options" and double-click "network access: the local account's sharing and security mode policy sets "guest-Local User-initiated identity verification" by default, and changes to "classic-Local User Authentication ".

1. Extend a wired network to a wireless network using wireless Routing
2. How does a wireless router establish a wired connection?
3. The perfect combination of wireless networks and wired networks is the final principle.