How does a smartphone connect to WLAN wireless internet? (s7562,s7562i)

1. on Standby, click the "Menu" button in the lower left corner of the screen and select "Set".

2. Slide the "WLAN" slider to the right to make it green.

Tips:

1. If the "WLAN" slider slides to theright and does not turn green, it is always grayed out, and it is recommended that you restart your phone and try again. If not, please back up your phone's important data, and then restore the phone to the factory settings. Recovery method: Click " application "-" set "-" Reset " -"restore factory settings ". )

2. Restore the factory settings, if the failure still exists, It is recommended to send the mobile phone to the service center by the engineer for your testing, service center related information please Click here view.

3. click on "WLAN".

4. There will be a wireless device that can be searched on the screen, and click on the wireless device that needs to be connected.

5. Enter the password if necessary, then tap Connect. ( when the network connection is successful,theWLAN feature icon will appear on the top right of the phone screen.) )

Tips:

If the ScreenTip indicates "validation error," This is due to an incorrect connection password, it is recommended that you confirm the correct password before you re-enter it.

If the above operation does not enable wireless Internet access, please refer to the following steps:

1. Open wireless router wireless signal and ensure the router network function is normal, router connection password is more than 8 digits.

2. Confirm whether the signal sent by the router is a signal supported by the mobile phone (802.11g/b/n).

3. Check with the router's instructions or contact the router's customer service to verify that the router settings are correct.

4. reboot the phone and reboot the router.

5. Use other devices to connect the router to see if it is normal, or to replace other router attempts.

6. If you can connect to another wireless device before, but now the connection fails, we recommend that you first "forget" the wireless device settings, and then search for new wireless devices re-enter the password connection.