How the desktop installs Bluetooth

The general desktop computer does not have the Bluetooth module, that how to install Bluetooth on the desktop, desktop computer Bluetooth how to use it?

The desktop has no built-in Bluetooth module, so you need to manually match a Bluetooth adapter and install the driver software (the Bluetooth adapter comes with a drive disc).

Select a Bluetooth headset, the search device can be successfully paired after the use of the because Bluetooth is a wireless data transmission technology, limited by the distance is more obvious, theoretically distance the farther the signal will decay faster, so the Bluetooth headset to listen to music can not expect to have how good quality, of course, high-quality bluetooth headset sound is still possible, But the price is expensive, if not enthusiasts to buy a different point on the good, as for the price, the current market on Bluetooth equipment brand is uneven, the price is different, or more understand the next move for good! Bluetooth devices can be paired with each other, if the computer and mobile phone Bluetooth connection, to see whether the phone model to support Bluetooth and function of the set.

Let's look at the stand-type computer how to install Bluetooth and desktop computer Bluetooth how to use the method:

　　First: the data cable to connect the phone into the computer's USB port, the computer will be prompted by new hardware (the proposed use of Windows XP system, which will simplify your installation process), the data line with the CD-ROM into the optical drive, so that the system automatically find the drive ( If the driver file in the data cable drive disc needs to be installed, install the driver file first, the general system can find the driver after a period of time, and prompt you to install it until the installation is complete. If you are prompted to "new hardware has been installed successfully, you can now use it" and in the hardware manager-"port" you can see a virtual USB port number, indicating that the hardware has been installed successfully, and can be a general operation.

　　Second: after the successful installation of hardware, the next is to install a GPRS modem (this may be installed in the driver's time has been installed GPRS modem, different mobile phone GPRS modem installation may have a difference), in the "Hardware Manager"-"Modem" If you do not see a mobile phone corresponding to the GPRS modem, you need to manually install (in the installation of GPRS modem, you may need to install the GPRS modem driver), installation methods, please read the data line or phone instructions.

　　Third: GPRS Modem installation Success, has been completed, next you need to create a dial-up link in the computer (this process can be in the system under the wizard, step-by-step completion), you need to fill out the "Dial: *99#, username and password is available."

　Fourth: set up the way of dial-up connection, if not this step, then the costs you can not afford to (0.1/kb,100 Yuan does not have much flow to consume), in the "Hardware Manager"-"Modem" to find the mobile phone GPRS modem, in the GPRS modem The "Properties"-"advanced, additional initialization commands" are filled in [At+cgdcont=1, "IP", "Cmwap]" (Note: the command in parentheses) to be sure.

　　Fifth: The above a few steps are OK, now you can dial, try, should be on it.

　　Sixth: dial-up success, indicating the connection rate is 115kbps, this surface dial-up connection has been successful, but the actual rate of not 115kbps in about 64kbps. Now open IE can not be on the WWW site, you need to set up the agent, the setup process is as follows:

In IE "Internet Options"-"connection" to find the dial-up connection you created, click "Settings" in the "Proxy server" set "Address: 10.0.0.172 Port: 80" click OK.