How to build a wireless network for a small family with two laptops and connect to the Internet at the same time

(In visit, you can easily establish a wireless connection, point-to-point connection, and do not need to add any devices. Of course, you must have a wireless network card. Now, basically all devices have wireless network cards, you can find this network in XP again !!!!!!!!! No, you can contact me to help you set it up remotely !)

 

I have searched other questions that Baidu knows before. It seems that the situation is not exactly the same as mine, so I have to ask them again separately. I hope some experts can help me with some help ~~

Basic hardware:

There is a broadband interface in the House, which can be used directly by plug-in.

Both laptops have wireless NICs, XP and Vista.

Expectation:

In the hope that a computer can access the Internet through a broadband interface, and the second computer can connect to the first computer via wireless connection, so that the two computers can access the Internet at the same time.

(Because a friend previously set up the opposite connection, his book uses wireless Internet access, and uses a data cable to connect two computers, and then uses a bridge to connect to the Internet at the same time)

I am close to the computer idiot and don't want to set these things. I hope the heroes can help me and tell me how to connect the two computers through wireless networks, can the two servers access the Internet at the same time?

What are the effects? And so on.

Or Bridge Connection is simply a bad idea. If you have other ideas and methods, you can also teach me ~~

Grateful ~~~~

Question added: I hope you can provide feasible solutions,

If it is feasible, I will add a higher score;

Do not just repeat the same thing that has been posted many times before.

Oh, well, I do not want to use a wireless router for the time being, because the other one is not long-standing, and this one is time-consuming and the wireless network card is poor, so the speed must not keep up with the speed of direct interface insertion ......

 

 

 

 

 

 

Best Answer

I understand what you mean. In fact, what you need is a point-to-point link. The same point-to-point connection means that a laptop with a full-day host is used as a server, and another laptop is used as a customer.

I know the train of thought. I forgot the specific method, so I found it for you (Honest !!!), If you have specific settings, you cannot find them. I have also tried it. It can be achieved and it is also labor-intensive. I hope it will be useful to you and add points.

By the way, because one of your systems is Vista, I cannot find a machine with this system, but the general method is that there should be no big difference.

Background: A few months ago, my colleagues and I went on a business trip to stay in a hotel with wired Internet access, but there was only one network cable interface,
We use two laptops with wireless NICs. We want to use this interface to make the two laptops accessible to the Internet. I checked a lot of information online, and there was no problem with point-to-point connection. The key was that the other one did not insert a network cable after the connection.
You cannot access the Internet. This is a bit unpleasant. In the future, my colleagues will be on a business trip, and they will not be able to get online. I think everyone has the same idea. It is easy for you to share your feelings.
In this case, multiple computers with wireless NICs can access the Internet through this interface. Let's take a look at how we implement it. Take the two computers as an example. If the two computers are successful, only the IP address of the other computers can be changed. The idea is to use a plug-in to access the Internet.
Line, used as a server, and other computers use it to access the network.

Solution:

1. The two computers are equipped with wireless network cards (nonsense) and drivers are installed properly;

2. Select a server with better performance (CPU and memory) and plug in the network cable;

3. Ensure that the server can access the Internet normally

4. Set the IP address of the wired adapter to manual instead of automatic (some friends do not understand, here are more, 1) view the IP address
Address: Choose "start"> "Settings"> "Control Panel"> "network connection". Right-click "local connection X" and choose "general"> "support". The IP address is displayed, write down (for example, my IP Address
Address: 192.168.1.88, subnet mask:
255.255.255.0, Default Gateway: 192.168.1.1), do not close; 2) set IP Address: Select the "General" Page and click "properties" to open the property page.
"Use the following items for this connection", drag the scroll bar on the right (if any), and left-click "Internet
Protocol (TCP/IP) or select it, click "properties" to open the (TCP/IP) attribute page, select "Use the following IP Address", and fill in the IP addresses you noted down in order, the following "preferred DNS server"
Fill in the default gateway (such as my 192.168.1.1) for the server, and "OK" to close a window. Do not move it. Follow me down)

5. This step is one of the keys. Select "advanced" on the last page of the "local connection x properties" window.
"Internet
"Connection Sharing", both of which are checked. In "Settings", I did not change it by default. If you are not at ease, select all. "OK" to close this window. (Note: if there is no "Internet
Connection Sharing. This is because all other network connections on your computer have been checked. Please confirm and remove other network connections from the Internet.
"Connection Sharing". The method here is the same. If you don't want to talk about it, click "OK ")

6. Set the IP address for wireless connection to the server. The IP address segment must not be the same as that for Wired connection.
It is also critical. Otherwise, the gateway and DNS will not work out.
IP address (for example, My: IP Address: 192.168.205.100, subnet mask: 255.255.255.0, Default Gateway: 192.168.1.88, preferred DNS

Server: 192.168.1.88 (note: the gateway and DNS must use the IP address of the wired network adapter). Remember to click "OK" to close the window. Do not close the "wireless network connection X ".
Sex window

7. Select the "wireless network configuration" page on the second page of the "wireless network connection x properties" window, and select "Configure none"
Line network settings, click New or add to open the Wireless Network Properties window, enter a network name (SSID) custom (such as: NEUSOFT-P2P-LINK), check remove from
Provide this key for me. Go up and enter "Network key" and "Confirm network key" (for example, neu88 and neu88, remember that the password is only five digits, next, check "This Is
Computers to the computer (specific) network; no wireless point is used. Click "OK" twice to close the window. OK, the server settings are complete.

8. The setting of other terminal computers is easy. They only set wireless network adapters (for example, colleagues' IP addresses ).
Address: 192.168.205.200, subnet mask:
255.255.255.0, Default Gateway: 192.168.205.100, preferred DNS server: 192.168.205.100 (note: the gateway and DNS here
Must use the IP address of the wireless network card of the server), where 200 of 192.168.205.200 cannot be the same as 100 of other terminals or servers.
In the "wireless network connection x properties" window, select the "wireless network configuration" Page and check "configure my wireless network settings in Windows". This is another key. OK, remember to click "OK" to close the window.

9. Connect to the wireless network, right-click "wireless network connection X", select "view available wireless connections", and click "Brush
New Network List ", the signal sent by the server should be displayed on the right
NEUSOFT-P2P-LINK, select it, click Connect in the lower right corner, enter password: neu88, neu88, connect, and prompt windows is connected
'Neusoft-P2P-LINK 'network, please wait ", OK, close all windows and get it done!

10. Internet access. If there is still a problem, first consider all laptops or firewalls with wireless network adapters to prohibit mutual access.
Q, for example, mine: (set rising firewall, system settings-Trusted Zone, add: Trusted Zone name: wireless connection to Trusted Zone, local address: all addresses, peer address: any address (I don't know what range you set,
According to your personal situation, it is not recommended) or the address range (192.168.1.0, 192.168.255.255) and "OK". Select the Trusted Zone service as follows: Select All and exit.

Now you can all access the internet. Learn Online, work, and play games, and learn a professional knowledge. You can give it to friends, leaders, and customers in the future! If you have any questions, you can add them to me. Other questions, such as databases and PowerBuilder, can be discussed together!

External discussion: (in our case, in fact, there is still a wired interface in the terminal book (this is my colleague). Imagine: Another one can be connected.
A computer with a wired Nic and without a wireless Nic interface (for example, a common PC)
Machine ). If you do not need a computer with a wireless network card, you can directly connect to the server (my own .) First, find a pair of connected network cables (the current laptops can be connected to a PC using a general network cable ).
And PC), the configuration scheme is basically the same as the above 10 steps, just change the role of the above wired network card and wireless network card. No time for this. The requirement is as follows: Internet Port
-- (Wired) -- notebook (My, server) -- (Wireless) -- notebook (colleague's, server) -- (wired) -- PC (desktop ). If you have done this, please let us know and see if you need it.
No change! My head is dizzy and ugly!