How to deploy a VMS with LVM enabled

1. Attach a 15GB disk into the VM

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/84/2E/wKioL1eHzGvhATmnAADm7rY5nHk274.png "/>

1. Check If the data disk has been attached.

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/84/2E/wKioL1eHzGzBtfscAABEVGIZMLo637.png "/>

1. Verify if the attached disk could is detected by Fdisk-l command.

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/84/2F/wKiom1eHzGzRNc92AACRfgIfoyQ234.png "/>

1. Create New physical volume on the attached disk

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/84/2F/wKiom1eHzGywGoUlAADI1goEC9I667.png "/>

1. Create a VG in PV/DEV/SDC

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/84/2E/wKioL1eHzGywXhibAAEZQZHVpX8184.png "/>

1. Create a volume in the VG BRUCE_VG

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/84/2E/wKioL1eHzG3SSDf1AAEesKXQ3o0582.png "/>

1. Create a file system on the volume

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/84/2F/wKiom1eHzG2yn2L0AAENMvUkbLU785.png "/>

1. Mount the file system

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/84/2F/wKiom1eHzG2TAAjHAADuzOezSbQ281.png "/>

1. Captured Imge

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/84/2E/wKioL1eHzG3wSUmYAABBAFwC6WQ956.png "/>

1. Deploy a new VM based on the image

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/84/2E/wKioL1eHzG7SDIODAAA7EB7dzvc546.png "/>

1. One the new VM you'll see the LVM file systems, and you could mount it again or another point

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/84/2F/wKiom1eHzG7SNY5cAADNG6e20F0647.png "/>

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/84/2F/wKiom1eHzG7CeXv5AADC7apv9As739.png "/>

1. Both VMS

650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/84/2E/wKioL1eHzG7CSSptAAEc4w3iai8739.png "/>

How to deploy a VM with LVM enabled