How to Establish a dial-up Internet connection

Setting up a dial-up connection is the first step on the Internet. Setting up a dial-up connection correctly is a prerequisite for whether you can access the internet. The following describes how to establish a dial-up connection.
I. Windows XP/2003 operating system:
If you are using a Windows XP/2003 operating system, you can directly create a network connection in the network neighbors, follow the prompts to complete the operation step by step.
Right-click "Network neighbors" on the desktop-"properties" and select "Create a new connection" in the left-side dialog box to start the creation wizard. Click "Next" to go to the network connection type selection page, select "connect to Internet", then "Next", and select "manually set my connection"-"Next ", select "connect with a broadband connection that requires the user name and password"-"Next" to set a name for your connection, for example, ADSL; "Next", and enter your user name and password, the password must be confirmed once, "Next", determine whether to create a shortcut on the desktop, and then click "finish ".
Ii. Windows 98/2000 operating system:
If you are using Windows 98/2000, you need third-party software to establish a dial-up Internet connection, china Netcom and China Telecom usually install dialing software for you when installing broadband. There are many free dial-up Internet software available on the Internet. We recommend a raspppoe software which is easy to install and easy to use. The installation method is as follows.

Software:<File Download>
1. decompress the file:Select the pppoe.zip file and decompress it with WinZip or WinRAR. Store the extracted files in the specified directory, such as C:/ADSL. The following files should be decompressed:


2. Protocol installation:Install the pppoe protocol, right-click "Network Neighbor", and select the network adapter you want to access the Internet, and call the "attribute" column.


Click the "Install" interface, select "protocol", and select "add ",


Select "add from disk"


Click "preview" and select the directory c:/ADSL where the extracted file is located from the computer. OK.


After the protocol is installed, if the user is the second version of Win98, the patch software needs to be run. Is 243199chs8.exe under C:/adsl. After completing the preceding steps, restart the computer. The following content should be included in the computer Nic attribute after restart.


3. Establish a dial-up network connection:Select "run" from the Start Menu, use "raspppoe", or double-click raspppoe.exe under the C:/adsldirectory.


Under query available PPP over Ethernet services through adapter, you can see your Nic. Select Your Nic. If not, check whether your Nic is correctly installed and whether it is bound to "PPP over Ethernet protocal. If the NIC is normal, click "query available service" to view the devices that can be connected by dialing in the box, as shown in. Click Create a dial up connection for the select adapter. a dial-up connection is displayed on the desktop or on the dial-up network in the control panel.
Now, the installation of raspppoe is complete. When you access the Internet, you only need to double-click the connection you just created and enter the user name and password to enable dial-up access.