How to set the bios boot disk

How to set the bios boot disk

BIOS is the abbreviation of the first letter in the English Basic Input Output System. After literal translation, the Chinese name is the Basic Input and Output System. The computer starts up. Only after passing the BIOS self-check will it hand over the permission to the operating system. For example, if no keyboard is detected when the BIOS is started on the computer, an error is reported immediately and the operation is terminated. Familiar with the basic operation methods of BIOS, which is of great benefit to the maintenance and use of computers. Today, I want to introduce how to set a BIOS boot disk on my computer!

Method/step 1

1. Create del on the keyboard during boot, and press 2 consecutively.

2. Go to this interface and click it.

3. on this page, click Hard Disk Boot Priority.

Method/step 2

1. Click Hard Disk Boot Priority to select: Use the plus or minus signs "+,-" on the keypad to select and move the device, select the USB flash Disk to the top, and Press ESC to exit.

2. Exit the interface and find the First Boot Device

3. Click it and set it. You need to install the software directly on this page. You can download the installation software in advance.

Method/step 3

1. In the past, the BIOS menu was basically in English, so many people were confused about how to operate the BIOS. However, because a common user enters the BIOS, the operating system is basically reinstalled, use a CD or USB flash drive to boot, so you only need to master the basic method of boot. How do I access the BIOS interface? In fact, the first screen has provided a lot of information. For example, the shortcut key for the startup Item of the Onda motherboard is the F11 key.

2. Many BIOS settings have two shortcut keys. One is to enter all options of BIOS settings, and the other is to directly enter the startup Item Selection interface, for example, you can press ESC in the Asus Notebook to directly enter the startup Item Selection interface.

3. Because the English menus on different boot interfaces of the motherboard are not the same, many people still feel unable to start with this. The key values for entering BIOS for each computer brand are listed here. For assembly machines, refer to the key values for entering BIOS for the motherboard of each brand.

4. For some BIOS versions, after entering the main interface, you only need to click the Boot page. Here is the interface for setting the startup items. Use the up and down keys to select the desired startup items. Press enter to confirm, press F10 to save and exit BIOS settings. restart the computer to read the preset boot media (enable the disc or enable the USB flash drive ).
CDROM = drive startup
SATA = hard drive startup
USB = USB flash drive

5. After setting the optical drive as the first boot option, restart the computer and read the CD after it is started. However, a prompt is displayed: Press any key to boot from CD ...... After a flash, the user needs to quickly click any key value to confirm the optical drive startup. Otherwise, the computer will think that the optical drive does not need to be started and then read the hard drive.

6. Similarly, when you set the USB flash drive to start, you also need to insert a boot USB flash drive. Some boot items do not contain USB, but you need to insert a USB flash drive to display the brand of the USB flash drive, note This.

7. If you have not prepared a boot function, you can download a USB flash drive PE microsystem such as cabbage and install it on a good computer, this is an essential tool for system installation and computer maintenance. After the preparation, these files are hidden and the remaining space can be used normally as a USB flash drive.

8. For example, after the Chinese cabbage startup tool is created, there is an option to simulate startup. After clicking it, it will be simulated in the graphic interface of the operating system, as long as there is no error here, after you restart your computer and set the USB boot item, you will be able to read the USB flash drive PE system.

9. If you do not need this USB flash drive PE microsystem startup tool, you can also click to return the space of the USB flash drive.

10. In addition, the current motherboard also has the NIC startup function. You only need to set this function to enable the Remote Wake-up function of the network.

11. Of course, if you do not need this function and accidentally set it to this function, it will lead to the disadvantages of a long boot time. Generally, if you set it to the default BIOS value, you can restore the hard disk boot as the first choice. For example, the default option setting method of Asus Notebook is: Press F2 at startup, find the Lood setup Defaults option, press enter to confirm, then press F10 to save the setting, and restart the computer.

12. In addition to setting the default items in the BIOS menu, you can also remove the button battery on the motherboard and clear the storage information to restore the default value. Because this button battery is used for timing after the computer is turned off, if you need to press F1 to enter the operating system after the boot, it is generally because the timing battery has no power, change one to restore normal.