The wired broadband cable is plugged into a no line from the WAN, and is then directly connected to your laptop (or desktop) with a network cable from the LAN port. And then open the browser, Input is generally 192.168.1.1, or 192.168.0.1, (see your manual) input management account and password, generally are admin, enter the Setup wizard, step by step, fill in the past, according to your broadband sources do a good choice, if it is ADSL, you have to fill in the user name and password, if there is a fixed IP address or is not a fixed IP address of the broadband, you need to fill out the necessary information, all the way to fill the past, very simple. For data and wireless network security, you go to the Special Wireless column to start the key, generally choose the WEP method, fill in the key you want to set up, note the number of key bits, see your page prompts, and then in the route to select the route to restart, not manually power, and then OK,
Specific graphic methods
Login to the Web interface, the general left a functional configuration options bar, users can make the necessary configuration options. And generally will first see the router's "running state", so that users can have a preliminary status of the wireless router master.
-Wireless Router detail setting ">
"Run State"
Then you can see the "Setup Wizard" (red box) function options, this feature allows users to make easy and fast network connectivity, but also allows users to the router to make the necessary basic settings, make it more convenient and quick to build a wireless network.
-Wireless router Internet Settings ">
The Setup Wizard interface
Click the Setup Wizard on the left, and then click Next.
Then there will be a choice of how to surf the Internet, generally divided into five ways, here because it is in the "Setup Wizard", so only three major Internet access mode, divided into PPPoE (ADSL virtual dial-up), dynamic IP (Ethernet broadband, automatically from the network service provider to obtain the IP address), static IP (Ethernet broadband, The Network service provider provides the fixed IP address, the other two kinds we will introduce later.
-Wireless router does not surf the Internet ">
Select a network connection method
If your Internet access is in the form of dialing and you need to enter a username and password, select "PPPoE". If you need to get an IP address automatically, choose "Dynamic IP". If you need to enter a fixed IP address, subnet mask and gateway address, select "Static IP". In addition to these three commonly used online methods, some wireless routers also support the Intelligent automatic choice of Internet mode, we in the actual use should be based on the actual situation to choose.
Click "Next" to configure the wireless settings. This interface is mainly to the basic parameters of wireless network and wireless security for basic settings. Users can modify the status, SSID and encryption settings of the wireless network according to the actual needs. Modify the SSID (Network name) to make it easier to find and use your own. In the "Mode" (red box), users are advised to select a blending mode to ensure maximum compatibility with network devices.
-Wireless router does not surf the Internet >
make wireless Settings
For the novice user, most options can be selected by default, only in the Wireless security option, select "Wpa-psk/wpa2-psk" Encryption method, fill in the password.
Click "Next" to see the "Setup Complete" prompt, click "OK" to complete the Setup Wizard settings.
-Wireless router Internet slow ">
Complete the interface
The router then restarts. Users will see the "reboot" of the progress bar interface, completed, you will see the final set of the interface, the whole process convenient, simple and easy.
-Wireless Router detail setting ">
reboot
Search for wireless signal connection to the Internet
The next step is to simply say the search connection process.
Enable the wireless network card, search the WiFi signal, locate the wireless router's SSID name, double-click the connection.
-Wireless router Internet Settings ">
Getting wifi information, connecting to the wireless router
-Wireless router does not surf the Internet ">
Then enter the password you previously set.
-Wireless router does not surf the Internet >
is connected, wait for a while, the connection on the Internet can be.
-Wireless router Internet slow ">