How to solve the restart Problem of a programmable Switch

At present, some programmable switches on the market claim to have QoS Assurance. In fact, they only support single-level priority settings and can achieve remote management. Therefore, you need to determine the Security and manageability requirements.

The "system restart" of the control switch is an automatic troubleshooting program which is set to exclude some system faults mostly software faults. When a program-controlled switch is running, once it encounters internal or external interference, it may easily cause "system restart", which will directly affect the communication quality and equipment maintenance.

1. The main cause of "system restart"

First, restart due to human reasons. Maintenance personnel are mainly responsible for personnel with low technical level and unskilled operations, and artificially inputting Dangerous commands or modifying Bureau data. Inter-Bureau relay lines are interrupted due to natural disasters or human causes and transmission equipment faults, after the system is re-configured, the program becomes chaotic; if the power supply system fails, the system loses power and reloads the system.

Second, restart due to unreasonable network structure and heavy traffic load. The traffic distribution of various cabinets in the main bureau and module Bureau is unbalanced, which exceeds the processing capability of the processor. The number of forwarding and trunk lines introduced into the switch is too large and the load is too heavy; when the telephone terminal board and the remote connection board are connected by digital relay, the objects of clock extraction are different.

498) this. style. width = 498; "border = 0>

Third, restart is caused by problems and defects in the software and hardware of the programmable switch. There are mainly work software without backup, and automatic switch is not possible if damaged; low processing capability, difficult to withstand excessive traffic, resulting in traffic congestion; low software version, function is not complete, as a result, users, trunk lines, and internal links cannot be automatically detached in a timely manner after the end of long-distance calls or abnormal connection.

2. Main countermeasures to prevent or reduce system restart

First, strengthen technical training and improve duty maintenance capabilities. It is necessary to adopt flexible and diverse methods, strengthen technical training for on-duty maintenance personnel, and improve the service quality. When the system fails, it can be handled in a timely and correct manner, in order to prevent "restart" upgrade and prolong the fault duration, strict implementation of the human-machine command management system and careful use of dangerous man-machine commands should be made; maintenance of system software should be strengthened, and the transcription of post-aid information should be completed in a timely manner.

Second, adjust the network structure to improve the stability of devices. It is necessary to know the traffic volume distribution, adjust the network structure in time, reasonably arrange the actual users on the LIM shelf, evacuate the traffic volume of the system, and compress the total number of calls during busy hours, avoid smooth connection, blocked access, and out-of-control traffic;

It is necessary to strengthen the management and relay maintenance of programmable switches, so as to prevent Switch Equipment and trunk line faults from low access rate, high congestion, and excessive traffic; it is necessary to reduce the number of introduced main bureaus and long-distance trunk lines to minimize the load of the main bureaus. It is necessary to reasonably solve the inter-office digital network synchronization mode, we recommend that you use the "master-slave" synchronization mode to connect the remote connection Bureau to the local terminal Bureau and user-controlled switches connected by digital circuits.

Third, upgrade the version in time to improve the system software functions. During version upgrade, the software debugging is complicated, and the switching system has a large number of hardware, which is difficult, demanding, wide-ranging, and has long communication interruption throughout the network. Therefore, before upgrading the version, technical personnel and relevant experts must be carefully organized to carry out repeated demonstrations and formulate feasible implementation plans and emergency measures, make sure that the version is successfully upgraded once.

1. Let's talk about the "potential rules" of the security switch"
2. Summarize the market status of high-end Switches
3. Security risks of LAN switches
4. PythonAndroid analyzes the differences and relationships between layer-3 switches and other layer Switches
5. Measure the Power Consumption Characteristics of LAN switches.