How to solve the memory shortage of the notebook computer

Laptop Low Memory Solution one:

can increase virtual memory or replace the memory bar;

Increase virtual Memory Size:

On the computer desktop, right click on "Computer" and select "Properties".

Go to the property main interface and click on the "Advanced System Configuration" on the left.

After entering the Advanced configuration, click "Settings" at the top right.

Enter the Performance tab, click "Advanced", and click "Change" under virtual memory.

The first item "automatically manages all drives ..." The hooks in front of it are removed, select a disk that is not C disk, the disk remaining memory is large, not commonly used for good; tick "custom size"; In the Fill box, the initial size can be set to 1~1.5 times the physical memory, the maximum can be set to 3 times times the physical memory, click Settings, and then click OK.

When you are sure, return to the performance options, click OK, and restart the computer for the changes to take effect.

Replace the memory bar:

Turn off the computer, remove the battery cover (battery box), with the appropriate change knife to remove the computer this set into the battery slot on the back cover of the screws, to pay attention to the screws under the ring, the use of the suction force to remove the knife, put to one side is not easy to fall.

After the screw is finished (if there is only one screw, it is called locking the back of the cover of the screws, as long as you remove it, the back cover can be slowly removed, using the change knife along the edge of a slight depression can be opened)

After removing the back cover, you can see where the notebook memory is stored, which is usually placed between the hard disk and the wireless card. After you remove the memory bar, you will see that there are two slots in it, one is empty, of course, so you can add another memory bar or replace the larger memory.

The solution to the low memory of the notebook computer two:

Notebook computer first open the system's Task Manager, click on the top of the "performance" to view the current memory usage, if the memory space is not many, it is necessary to reduce the number of open programs, otherwise the smaller the memory, the system will be more slow reaction. Then switch to Task Manager's Process tab, and then click on "Memory" to let the system sort by the size of memory consumed, and you can visually see which programs occupy a large amount of memory in the system, causing our system to run slower.

For example, the application that displays "Firefox" in process management has a large memory footprint. If you are not using Firefox to browse the Web, you can shut down the application or simply end the process from task management, freeing up more memory space.

Then go back to "performance" in Task Manager to see the current available memory. You will find that the system has more available memory than the original, this method is applicable to our computer installed on the software too much, and there are a lot of boot run programs, such as the system started with some players, chat software.

With Task Manager, you can learn more about the memory we are currently using, and also help us find out which software is taking up memory space, so that we can determine whether to end it or remove it completely from the system according to our own needs. By cleaning up the software, we turn off the software that we don't use very often, but consumes the system's memory, thereby freeing up more memory space.

When the computer system has insufficient physical memory, the system automatically enables virtual memory to solve the problem of low memory. The so-called virtual memory, is the system to the hard disk area as a physical memory (RAM) to use, but because the hard disk read and write speed and memory is far from enough to compare, so in performance will have a big difference.

When the system memory is not enough, you can find that the hard drive lights will always flicker, and this time the computer's response speed is particularly slow, this is the system is using virtual memory on the hard disk to deal with the lack of physical memory. Select "Computer", click the right mouse button, select "Properties", in the pop-up System window, click on the left "advanced system settings."

Then in the System Properties window, click "Advanced" and click "Settings". In Performance options, click Adjust for best performance. The advantage of this setting is that the visual effect is sacrificed to allow the system to consume less hardware resources. Next, we click on the "Advanced" option to see the current "virtual memory" size.

If your computer's memory is really inadequate, you can change the virtual memory appropriately. However, it should be noted that virtual memory is not as large as possible. In general, do not exceed twice times the physical memory, otherwise the system may run more slowly. If necessary, the physical memory can also be installed to solve, the installation of physical memory on the system to improve the speed is the most obvious.