In Windows 7, how does one perform color calibration?

In the control panel, the path is "appearance and personalization" and there is "color calibration" in the display subitem ";



Click "color calibration". The color calibration page is displayed;



After clicking "next", some basic introductions and requirements for color calibration will be displayed;



After you click "next", the gamma introduction and Gamma adjustment icons will appear;



After "next", you can use the slider to adjust the gamma to be "exactly" as shown in the previous figure;



Then, click "next" to prompt whether to debug the brightness contrast, and confirm that the adjustment button on the monitor is ready for adjustment;



Click "next" to go to the brightness overview and adjust the brightness;



After "next", adjust the brightness of the monitor to "exactly" the same as that shown in the previous figure.



Click "next" to enter the contrast description and adjust the contrast diagram;



After "next", you need to adjust the contrast of the monitor to be "exactly" as shown in the previous figure.



After the adjustment, click "next" to display an overview of the adjustment of color balance and an illustration of the adjustment of color balance;



After clicking "next", you can adjust the color balance by adjusting the red, green, and blue slider to the normal range shown in the preceding figure;



Click "next" to display the completion page.



On this page, you can compare the differences before and after calibration by selecting the previous calibration and the current calibration, and click finish to complete the color calibration process.