Install Windows Vista with a USB drive

Using the U disk installation Vista sounds incredible, in fact, is really at this time by a foreign IT industry experts proposed!

In fact, the reason is very simple. He said that using a high-speed USB flash drive to install vista faster than through the DVD speed of several times, the general use of hard disk installation will take about one hours, the use of CD-ROM installation will take about 20-25 minutes, but if the use of flash disk installation only need 5-10 minutes to install the completed!

The General Vista installation disk needs to be between 2-3.5g, that we first equipped with a relatively large u disk good, at least later can accelerate the system, and then how can still keep copies of the file it! Don't begrudge it. Please note that the disk space must be sufficient, otherwise run to create partition primary This step system will prompt you insufficient disk space, also indicates that you can not use this method to install vista!

Just say no. Take a look at the following specific steps:

First from the computer, F8 into the Biso will be the CD-ROM drive to boot to the U disk!

To format a disk:

(1) Enter the command prompt you open.

(2) input x (where x represents the volume label of your U disk): Enter

(3) in X:cmd

(4) According to the prompts to enter

1. DiskPart

2. Select disk 1

3. Clean

4. Create partition primary

5. Select partition 1

6. Active

7. Format Fs=fat32

8. Assign

9. Exit

But note that the above commands are supposed to be recognized as disk Disk 1!

Complete the steps above to copy our Vista installation software to our USB drive, and enter the following command xcopy D:\*.*/s/e/f e:\ You can automatically copy the file! Restart the computer, the installation, the patience to wait 5-10 minutes on the line!

Finally, after the installation of Vista, please start the U disk and then change to hard disk boot!