Installation Method for Windows 8 CP without an Input key

A major reason many people use Windows 8 CP is the legendary speed, Fast Installation, Fast startup, and fast running. A major pain point in the installation process is to enter the key, users like hard drive installation and virtual optical drive installation are fine. You can copy and paste the key to simplify key input. For those who use the disc and USB flash drive installation, remember the key somewhere before installation, then, during installation, press the keyboard one by one. If you lose it, you have to try again. This is really troublesome.

I think this step is the most cumbersome during installation, and the rest is to press the "Next" button, right?

However, with the following method, you can forget to enter the egg key for preparation:

Prepare the following two software in your Windows system.
Notepad program
UltraISO

1: Open notepad (I don't need to talk about it if there is a notepad)



2: Enter the following text (ps: You can also directly copy ...)
[Pid]
Value = DNJXJ-7XBW8-2378T-X22TX-BKG7J



3: Save the file name as pid, in the format of txt (yes, you are not mistaken, that is, txt)


4: Enable UltraISO. Note that you must use "Run as administrator"



5: Use UltraISO to open your Windows 8 CP image, switch to the sources folder, copy the saved pid.txt file to the sources folder, and save or save the modified image, for later Installation



6: If your original image has been decompressed to the hard disk or has been written into the USB flash drive, copy the pid.txt file to the sources folder under your installation directory file. The effect is the same.



Http://tieba.baidu.com/p/1553657968